Turbo Buick Forums banner

SMC Meth Injection

6.1K views 4 replies 5 participants last post by  Audie1  
#1 ·
I am new to this forum i have a question on how to operate the SMC Meth Injection system...

I bought a 87 Grand National that was equipped with a late model SMC injection on it... I will like to know how do i mix the 50/50 ratio or can i just run straight meth or Denatured alcohol... Also what is a good starting point to put the spray speed & pump speed...

Thanks Alot
 
#2 ·
Welcome! Can you list what else is done to the car for mods. What chip are you running etc. As for the SMC straight methyl hydrate or denatured is fine. A start point try 12 min & 18-20 max for a test. You also have a knock detector of some sort I assume?
 
#3 ·
If he truly has a progressive smc kit with the external pump, that is good advice
 
#4 ·
If the kit is a few years old (round bottle with pump inside) you will have to use some sort of alky lube (Klotz,Redline etc) if you want to run straight Meth.