Turbo Buick Forums banner
1 - 9 of 9 Posts

·
Registered
Joined
·
113 Posts
Discussion Starter · #1 ·
I'm looking for the following items:

- Powerlogger
- 50lb injectors with chip for 93 octane fuel
- 112 race gas chip - 22-24lbs boost

Question for race gas - will my current TT 5.7v chip which is set up for 17lbs boost and 93 octant be okay for a few passes with C112 VP unleaded race fuel? Will I need to be changing out o2 sensors with unleaded?


Thanks,
Ang
 

·
Registered
Joined
·
783 Posts
Why are you going to waste race gas with a street chip? You won't make more power unless you turn the boost and timing up.
 

·
TO HOLD ON HIGH
Joined
·
784 Posts
I have a set of 8x 50 pph Delphi injectors (high impedence) but no chip.GM PN 17104487. $200 shipped and they are yours.

Specs:

Static Flow Rate: 50.0 lb/hr @ 43.5PSI (300kPa) 525cc/min or 6.4gm/sec

Static Flow Rate: 57.7 lb/hr @ 58.0PSI (400kPa) 606cc/min or 7.4gm/sec

Dynamic Flow Rate: 1.1 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 43.5PSI (300KPa)

Dynamic Flow Rate: 1.3 gm/pulse - 2.5ms pulse width and 10ms repetition rate @ 58.0PSI (400KPa)

Coil Resistance: 12 Ohms / High Impedance / High-Z (No ECM driver modifications required)

Cone Spray Angle - 22.4 degrees - Single spray cone. Approximate cone angle for 90% of spray volume

Ball/Seat Design with 6-Hole Diffuser Disc

Flow tested by Delphi to 2% tolerance.
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Get a $25 ball & spring boost controller from e-bay & a chip burned for "Your Combo" from Eric to run at 24 lbs. Then see what PL readings are & go from there. It takes patience, practice & $$$ but it's fun!! :cheers:
 

·
Registered
Joined
·
113 Posts
Discussion Starter · #5 ·
Get a $25 ball & spring boost controller from e-bay & a chip burned for "Your Combo" from Eric to run at 24 lbs. Then see what PL readings are & go from there. It takes patience, practice & $$$ but it's fun!! :cheers:
Perfect - that's exactly what I want to do - just have a race chip for the track. Is Eric's turnaround time pretty decent?
 

·
Registered
Joined
·
113 Posts
Discussion Starter · #6 ·
Full Throttle is all out of PLs - does anyone know who might have one in stock?
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Full Throttle is all out of PLs - does anyone know who might have one in stock?
Check with Eric as he may have a few stashed?? He has them in his store?? Chip will be burned & here in a few days if you tell him your in a rush. TurboTweak Home
 

·
Registered
Joined
·
113 Posts
Discussion Starter · #8 ·
Thanks David - I sent Eric an email - hopefully he replies soon.
 

·
Registered
Joined
·
1,371 Posts
You can also try Brian Weaver at G Body Parts, believe he carries them too.
 
1 - 9 of 9 Posts
Top