[stickybones]

Anyone recognize who made (or still makes) this bleed valve and/or which vendor sold/sells it?

I bought it ~ 10yrs ago from one of the TR vendors. I like the way it works in my application. Recently, I stripped the set screw on the knob and now I can't lock it into position at my desired boost setting. I wanted to simply remove the knob and drill and tap a new hole for a new set screw but I can't get the knob separated from the needle post its attached to when I remove it from the valve. I was hoping to either get another just like it (i.e. same size bleed hole and needle seat) or contact the vendor/manufacturer to tell me how to get the knob off so I can drill a new hole.

Thanks
Mike

 

[wdunfee]

There is an Ebay item similiar to what you have.. Item# 8067536690 vendor roscoejohnson1.. Check it out..

 

[Ttype83]

Thanks for the ebay item, added to my watch list. My 83 and 86 could use one :cheers:

 

[rastaz]

Those were made by ATR...

 

[stickybones]

Thanks for the ID fellas. ATR makes sense as I used to buy stuff from them way back when.

 

[Juggernaut]

ATR went out of buisiness, in case you didnt already know...

I had a downpipe on order with them when they did