Turbo Buick Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
743 Posts
Discussion Starter · #1 ·
I could not turn my adj. wastegate so I sprung for a new one. I installed it today and I noticed that the vaccuum line had oil in it. Also the entire arm on the old wastegate would turn. Is this normal? Or do I have a problem? And the sensor that the Y shaped hose goes to does what exactally? It has two vaccuum ports and only one is connected. Thanks
 

·
Registered
Joined
·
1,693 Posts
Ok if I can remeber it all.
Mine has some oil in it too.
You have to hold the rod stationary then turn the bolt.
The Y hose connects to the lower port on the boost solenoid. The top port has nothing unless you still have the foam filter.
The boost solenoid is used to control boost.
 
1 - 2 of 2 Posts
Top