Turbo Buick Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
Got a leak. Need to find some different valve cover gaskets. I have after market heads and valve coves that don't flush very well. Short of planing down the valve covers, I'd rather try some thicker gaskets first. Anybody know of a good place to start? Are rubber gaskets usually any thicker, or rubber cork, tuff cork? Brand preference?
 

·
Registered
Joined
·
84 Posts
I use break cleaner to prep for all mating surfaces, then I coat a thin layer of grey silicone to each side of the gasket, rubber or cork, never had a leak.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top