Turbo Buick Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
I know this is in the wrong section, but it seems that this forum sees way more action than the trans forum.

I just installed a street/strip valve body kit and billet servo from Chris at CK Performance. I had 2nd gear before, but now second will kind of grab with low throttle, but absolutely nothing with any power. All of the other shifts seem way better than before.

I will call Chris on Monday if needed, but I will be dwelling on this all weekend.

Hope you may have some answers.

Thanks, Cory

1987 Grand National
Completely stock motor
CK Performance Valve body and Billet Servo.
 

·
Registered
Joined
·
18 Posts
Discussion Starter · #2 ·
Well, pulled the servo out, seemed to have the pin in correctly. Reassembled with the same problem.

Read some posts that it could possibly be the TV cable out of adjustment, no luck.

Thought just for fun I would try the stock servo(not the GN servo, stock olds 307 motor, tranny servo) now shifts into 2nd better than before the VB upgrade.

Read another post about a guy who needed a longer servo pin with the billet servo. Could this be the issue?
 
1 - 2 of 2 Posts
Top