[Grannynational]

Can I go to napa or my local parts store and get a timing chain for my car or should I order it from sombody, also I was thinking of putting a new oil pump on while I have the cover off. Any recomendations?

Joe

------------------
1986 Buick Grand National
TA-49, 009's, Hooker cat back, CAS V4, Art Carr 3000 stall, THDP, SMC Alcy and all the other usual stuff.
[email protected]

 

[Orlando_87GN]

Any Auto Parts store will have both.

DynaGear steel timing set, sorry I forgot the part number. $12

Sealed Power oil pump rebuild kit. $9

------------------

'87 GN - Stock Block, Stock Cam, Stock Turbo, Stock Heads, V4, MSD50's, TH DP, JayJackson 62mm TB, 16position MaxEffort Chip. 3680# with Driver
11.92 @ 111.77mph

'87 Mazda RX-7 w/GN Powerplant
11.15 @ 120 MPH
Visit : http://www.MisRed.com

mailto:[email protected][email protected]</A>

 

[salvageV6]

Get the updated roller cam button thingy from a vendor.

Neoprene front seal and gasket set too.

I wouldn't touch my oil pump unless adding a booster plate. Assuming there's only 100K or so on it.

Just my .02.

 

[turbofrank]

GM timing chain kit,as said above too

 

[Turbocars]

You can get everything you need from NAPA including the roller button and TC tensioner.



------------------
Hank Terry
87 GN, 10.95 @ 125, race trim
87 Ltd, 11.42 @ 119, street trim & SMC AI
89 RX7 GTU > GN V6 conv in progress
http://turbocars.tripod.com (PowerMaster sales info & etc.)

 

[Grannynational]

Sweet, I knew I liked the General for a reason, cheap parts.

Joe

------------------
1986 Buick Grand National
TA-49, 009's, Hooker cat back, CAS V4, Art Carr 3000 stall, THDP, SMC Alcy and all the other usual stuff.
[email protected]