Turbo Buick Forums banner

smc kit is in!!!!!

300 Views 6 Replies 4 Participants Last post by  SMOKE YA
Just a coulpe of questions? I have a thrasher 93 chip now will that work and how much boost can I run on my stock turbo(safely that is)????IF thrasher 93 wont work should I get a thrasher 100?? Then my next question is .my trans shifts great when cold ,but not as hard when warm... will a trans cooler help it shift firmer all the time or should I adjust on the AV cable????? sorry so long Please help.... THANKS ALOT!!!!!! powersix headbang
1 - 7 of 7 Posts
Chip will work ok with alky. I ran in 12s with the 93 Thrasher. The 100 would be a better deal or if you want a custom chip get in touch with Eric Stage I.
I put a cooler and some Honda transmission fluid in my 130,000 mile transmission and it has solve my slipping problems for now.
I meant to say will the smc alchol kit work with the thrasher 93? I am also completly stock except for what my signature says. I do have scan tool to read KR.... THANKS AGAIN!!!
HELLOOO ANYBODY HERE???????????????? :D :D
Get yourself an Art Carr shift kit and use the 700 filter. Buy a truck tranny cooler and through that on.

You should be able to run around 24psi, it is all dependant on altitude and ambient temperature. Otherwise you should be fine with the SMC.
ES answered you with his first sentence. :)

No reason it will not work. With regard to max boost, you will have to determine that yourself.

Put the pump speed in the middle of the range, then turn the boost up until you see some knock. Then add more pump speed and see if the knock goes away....you may be able to increase the boost some more but go a pound at a time.

Note that if you turn the alky on and don't have much boost, the car may blubber from too much spray until the boost is increased.

Just follow the instructions. :)



THANKS ALOT EVERYONE YOU GUYS ARE GREAT!!!!!!! AS SOON AS IT QUITS RAINING , i WILL TEST AND TUNE!!!! READY FOR MORE BOOST!!!!!!!!!!THANKS AGAIN!!!! :D :D
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top