Turbo Buick Forums banner

1 - 1 of 1 Posts

·
Registered
Joined
·
198 Posts
Discussion Starter · #1 ·
well heres the problem, on the brake pedal there is the switch that controls the cruise and the torque converter lockup was not in the holder to contact the pedal. before it was connected, the trans would run hot (210-250) and cruise wouldnt work. after re-installing it the temp came down around 150 but would skip 3rd gear shift and go right to 4th. if i move it away from the pedal it will shift into 3rd and then to 4th like its supposed to......anybody have this problem or know whats going on would be great before I pull the rest of my bloody skraggly hair out. the trans is a TCI streetfighter with a 3000 stall and has about 3000 miles on it:confused: :dunno: :confused:
 
1 - 1 of 1 Posts
Top