Turbo Buick Forums banner
1 - 1 of 1 Posts

·
We Have Lift-off
Joined
·
1,647 Posts
Discussion Starter · #1 · (Edited)
MSD 8551 Distributor Modded for Crank Trigger $100
RJC VC Spacers $50
Crane Solid Roller Lifters $100
4"" Sheet Metal Trans Pan ( includes PTS Pick-up and New Gasket ) $150
GM Fuel Hanger with Red's XP Pump $150
3.73 Gears for 10 Bolt ( used from Strange ) $100
ATI 7"" Balancer $150
ATR ECM-10 Monitor ( You can still use the o2 and Fan Switch devise ) $100
Re-stalled D5 Converter $175
3.5" Exhaust with Ultraflow ( Custom made to work with the 3.5 GN1 DP $150
2 Sets of stock VC $50 pr
CK Billet Input Shaft for the TH200-4R ( New ) $200
TH200-4R BRF Transmission Billet Parts from CK, best of everything ( Slips a little )
cost me well over $2000................may need to replace some Clutches $1000
9.400" Pushrods $100
Stock Lower Intake ( Match Ported to Stock ) $100 Sold
Strange C- CLip Eliminators for Strange 28 Spline Axles $100
Anchor STrap Kit $25
Moroso Vacuum Tank $25
ARP Head Bolts for Iron Heads ( installed never run ) $50
2 Nodular Centerline Wheels 15 x 10 ( 4.5 bs ) like on my sig no scratches or drilled $400
Chrome Blower Motor Cover $20 Sold
Chrome Master Cylinder Cover $20 Sold
PTE FMIC ( for external Gate, has 2 Alky Holes on the Up Pipe ) $500 Sold
Aluminum Transmission Cooler $50 1 Sold
10" Mr. Gasket Electric Fan $50
4" K&N Cone Filter $25
5" K&N Cone Filter $25
PTS 275PSI Regulator Kit ( New ) $50
BRF Governor ( Not Modded ) $50
BRF Gov ( Modded -bigger Hole ) $50
10 Tooth Green Monte Carlo Gov. Gear $35 Sold
GN1 3.5DP WG Springs #8 and #20 $10 ea. Sold
======================================
All prices are 1/2 price of new or more
List was too long to post with Pics, so please ask. May take a while.
Shipping NOT included, and will be shipped MAIL to reduce cost.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top