Turbo Buick Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
36 Posts
Discussion Starter · #1 ·
I am looking to buy 2 rocker arms and 6 acorn nuts to fit the heads on a 89 turbo trans am. Alternatively, the rocker arms and acorn nuts off a 1980's GM 3.0 liter front wheel drive car (probably Buick or Pontiac) will work too.
 

·
Registered
Joined
·
422 Posts
ummm these were shaft mount rockers on the turbo 3.8, were they not? If you need the shaft mounted stuff, i have it. Make an offer and both shafts and all rockers are yours.
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #3 ·
Grand nati0nal said:
ummm these were shaft mount rockers on the turbo 3.8, were they not? If you need the shaft mounted stuff, i have it. Make an offer and both shafts and all rockers are yours.
Unforetunately the heads on the TTA which are cylinder heads from the GM 3.0 litre V6 are rocker arms versus rocker shafts. Thanks anyway.

Mark
 

·
Registered
Joined
·
36 Posts
Discussion Starter · #4 ·
Does anyone have the parts that I need or know of where I can purchase them...short of going to the dealer here in Alaska?
 
1 - 4 of 4 Posts
Top