Turbo Buicks banner

1 - 3 of 3 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Any 1 know where I Can Get a Replacment pump for alky, for the SMC Injection kit, The First One~ ? Or if i Can Use One of Those Small Fuel Pumps, And Rig Up a Pick Up Tube For IT? Then Make The Fittings For The Top? :D
 

·
Registered
Joined
·
60 Posts
i know this is an old post, but i was wishing that someone had answered it last week when i wanted to know the same thing.
on my SMC kit he used an airtex E8248 with the outlet modified. autozone didn't have one in stock but the counter guy found an airtex E8002 that was actually cheaper. the outlet is different, but i think better for this application. i unscrewed the outlet fitting and drilled and tapped the inside of it for the 1/8" NPT thread that connects to the bulkhead connector on the tank. you will also need to buy a 1/8" close nipple (the shortest one they make) to thread into the fitting you tapped.
 

·
Mine's BIGGER than yours!
Joined
·
296 Posts
Search for this info on the other board. Lots of info and part numbers. I'm in the same spot.
 
1 - 3 of 3 Posts
Top