Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Resident Idiot
Joined
·
11,462 Posts
Discussion Starter · #1 ·
Hi all,

I am getting ready to replace the "blinking 85MPH" chip with the caspers unit..

I was wondering, while I was at it, if anyone knows of a replacement clear plastic piece that I could swap out while I have the speedo cluster apart?

This piece I am talking about is the clear piece of plastic window that covers the speedo cluster. It gets scratched and dull over time, especially when armour all or other cleaners get squirted on it...

If anyone has any info, let me know
. Thanks.

------------------
Email Address: mailto:[email protected][email protected]</A>


Current Combo: Stock Turbo, V4, MSD50's, TH DP, JayJackson 62mm TB, 16position MaxEffort Chip.
12.35 & 108.39 Street Trim.
 

·
Registered
Joined
·
20 Posts
Don't laugh at this,but go to your local fire department and ask where they get their lens polishing compound for their helmet visors.This should work nicely for your instrument pod lens.Post back and let us know what you find.Good luck.
 

·
Resident Idiot
Joined
·
11,462 Posts
Discussion Starter · #3 ·
Any other ideas? I am going to take the dash out next week at the same time I am doing a motor swap. Wanted to put a piece of glass in there..

------------------


Stock Turbo, Stock Heads, Stock CAM, V4, MSD50's, TH DP, JayJackson 62mm TB, 16position MaxEffort Chip. 3750# with Driver
12.35 & 108.39 Street Trim
11.92 @ 111.77 Race Ready
mailto:[email protected][email protected]</A>
 
1 - 3 of 3 Posts
Top