Turbo Buick Forums banner

Oil Coolers

247 Views 1 Reply 2 Participants Last post by  mike85gn
Lookin fer info/experiences on aftermarket "stand alone" engine oil coolers (want to elim. rad side tank stock system).

How to size oil cooler for best effic. don't want to go too big or too small or is there such a thing (too big/small)

ds
1 - 2 of 2 Posts
Small is better than none, let's put it that way. I have a Summit unit and it fits great! It's safe insurance too because even a few degrees reduction will help when the oil gets to the turbo. And it's cheap! If I had to again, I'd use the 2-in-1 trans and oil coler though, makes everything a little cleaner in the front. But if it's the cooler on the pssgr. side of the rad, that's the trans cooler. Those are good too! I have one of each and the car runs great all the time.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top