Turbo Buick Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter · #1 ·
Wondering if anybody out there using the ATR roller rockers have the same problem? Very noisy..... what gives? Any suggestions would be greatly appreciated.


rant
 

·
Registered
Joined
·
278 Posts
ATR sells T&D, I have a set of 1.65's and depends on the CAM you use. May be a little noisy, but not that much. Check you Lash!!

Joe
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #3 ·
Response:
ATR sells T&D, I have a set of 1.65's and depends on the CAM you use. May be a little noisy, but not that much. Check you Lash!!
_______________________________________________

What cams are you using?
 

·
Registered
Joined
·
140 Posts
mine are noisy also (with 214/210 roller cam)...so much so, I had to disconnect the knock sensor
 

·
Registered
Joined
·
7 Posts
Discussion Starter · #7 ·
Originally posted by: Joe_Biucchi

Hyd. Roller

________________________________________________

We also have Hyd. Roller from ATR and wondering what pushrod length you went with.
 
1 - 7 of 7 Posts
Top