Turbo Buicks banner

1 - 2 of 2 Posts

·
Registered
Joined
·
134 Posts
Discussion Starter #1
87 gn . Need to tap into the maf 0-5 volt signal wire for the progressive controller. Which wire is it. Thanks
 

·
Registered
Joined
·
84 Posts
One in the middle, strip away wire and solder into it. Coat it with that liquid insulation stuff. Be sure you have 1.6 v ignition on only. If you want to exercise your map I regulate 20 pounds of air from my air hose and blow into it while you check for voltage rise to about 5v. Be sure your vacuum line is good or it doesn't work right period.
 
1 - 2 of 2 Posts
Top