Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
18 Posts
Discussion Starter · #1 ·
Stock turbo and injectors at 24 psi with 20 in O.D and 4.56 gear. 5 psi launch with 9" slicks - a 1.66 60' and 12.3 at 110.

The starter said that my trans was leaking fluid and I noticed some leakage when I replaced the govenor after a wild burnout. If the pan gasket is not leaking, what is?? and how hard is it to repair?
 

·
Registered
Joined
·
1,797 Posts
Could be the tailshaft seal (easy fix)Dipstick to case seal, wiring connector plug seal, or case vent.
I just went throught this and it ended up being the tailshaft seal.

Paul
72 Toyota Celica with a 87 TR drive train
 

·
Retired
Joined
·
1,966 Posts
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top