Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
6,966 Posts
Discussion Starter · #1 ·
Bought the diagonal front ones used and the cross brace used. So my question is does the cross one interfere or install in the same holes as the diagonal ones or is there a proper order to install them.

Are the holes for the cross brace pre-existing, haven't been under the car to look yet.
 

·
Moderator/Procrastinator
Joined
·
1,500 Posts
I got my front crossmember braces off a Cadillac and the holes were pre-existing. They can be found on other G-bodies, so I scored mine for 5 bucks. Nice and thick, too!
 

·
Registered
Joined
·
2,487 Posts
I had on my Kirban made frame rail to framerail brace and just put in the cross braces that I scored in a junkyard and the front holes in the GM cross braces are the same holes for the Kirban single brace. The bolt from the GM braces will work fine and tie everything all together..

------------------
Frank Szymkowski
FlyinGN 87 GN
[email protected]
 
1 - 3 of 3 Posts
Top