Joined
·
10,293 Posts
Found few things that might help you guys out.
For you Canadian guys,Canadian Tire sells the stacked plate trans coolers for $83.All hardware is included;adaptors,hose,brackets,everthing.Quite comprehensive.That's the big one,11"x11"x3/4".P/N #14-0106-8[24,000 lb. GVW].They also have the medium size[18,000 GVW]7&1/4"x11"x3/4",P/N #14-0105-0.
They have a small one[P/N 14-0104-2,GVW 11,000 lb],but I wouldn't waste my time.
Considering the American prices for these,and the fact they're made about 20 minutes from where I live,that's a good deal.
I also found a real nice exhaust flange gasket.Mr. Gasket P/N #5980.It's stainless core with graphite facing.Don't know if any of you guys have tried it[they come two to a pack for around $20 Canadian],but the construction appears to be the same as the Felpro 1400 exhaust gaskets.Looks like they could be a good ticket.Might work better than the copper stuff I so dearly "love".
They've got 2&7/16" holes and perfect spacing for the bolts.Almost like they were made to mate my 63e to my ATR headers.I'm looking forward to this.
Hope that helps a bit.Later.
------------------
Give em' hell!
For you Canadian guys,Canadian Tire sells the stacked plate trans coolers for $83.All hardware is included;adaptors,hose,brackets,everthing.Quite comprehensive.That's the big one,11"x11"x3/4".P/N #14-0106-8[24,000 lb. GVW].They also have the medium size[18,000 GVW]7&1/4"x11"x3/4",P/N #14-0105-0.
They have a small one[P/N 14-0104-2,GVW 11,000 lb],but I wouldn't waste my time.
Considering the American prices for these,and the fact they're made about 20 minutes from where I live,that's a good deal.
I also found a real nice exhaust flange gasket.Mr. Gasket P/N #5980.It's stainless core with graphite facing.Don't know if any of you guys have tried it[they come two to a pack for around $20 Canadian],but the construction appears to be the same as the Felpro 1400 exhaust gaskets.Looks like they could be a good ticket.Might work better than the copper stuff I so dearly "love".
They've got 2&7/16" holes and perfect spacing for the bolts.Almost like they were made to mate my 63e to my ATR headers.I'm looking forward to this.
Hope that helps a bit.Later.
------------------
Give em' hell!