Turbo Buick Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #1 ·
I ordered 36lb injectors from Poston not too long ago. I have some people take notice to them and they said they aren't 36. They resemble very closly the MSD 50's. If any1 has them MSD's please tell me the number that is stamped on them. Mine is 4301 17090304

Thanks
Scott
 

·
Registered
Joined
·
6,887 Posts
Your in luck, since it has been snowing up here I haven't had a chance to install mine. The 50 MSD serial #'s on mine are: 8281 17104487. Little bit of a difference between 36ers and 50's. Hope this helped!

Nick
 

·
Registered
Joined
·
22,915 Posts
I did a search on your part number on the GNTTYPE mailing list archives and came up with this: (maybe it'll help a little, appears they may be 40lb'rs)

From: [email protected]
Subject: Yet Another Injector Question (40pph)???
Date: Sat, 13 Jan 2001 16:59:48 -0500

Folks:

A friend has a set of injectors installed that look just like the AC
Rochester 12 ohm, 50pph Injectors (MSD-50's). They are grey on the bottom,
and black on the top.

He advised me that they are 40pph injectors. I always *believed* that 40pph
injectors were also referred to as "Red-Stripes". Well, I see no red-stripe
on these injectors.

The numbers read as follows: 5040 17090304.
The numbers on my 50pph injectors are: 5227 17104487.

Anyone know what these are? Jim are you still out there???

Thanks,

Edward Pinzel
[email protected]




[This message has been edited by Zap (edited May 04, 2002).]



Never pay again for live sex! | Hot girls doing naughty stuff for free! | Chat for free!
 

·
Registered
Joined
·
6,887 Posts
Mistakes sometimes happen! Never know when one may luck out! The different design and shapes can really screw with Zap's mind.
 

·
General Useless POS
Joined
·
1,801 Posts
They may be Delphi 37's. I got a brainstorm, call Poston and ASK!


------------------

Jim Testa
1986 Regal T-Type
Stock block w/girdle, stock rods, TRW's, JE pins, 214/210 roller, TurboMotion port/polished heads w/1.77-1.50 valves, T&D roller rockers, Champ intake w/o EGR, PTE plenum, Accufab 70mm TB, MSD50's, TE61, PTE front mount, SMC alcohol inj, JT trans, 3000 vigilante, stock rear w/Hotchkiss arms, and kick ass tunes..

 

·
Premium Member
Joined
·
43,735 Posts

·
Registered
Joined
·
84 Posts
Discussion Starter · #7 ·
I figured i ask here since postons was closed for the night and the weekend. I will call monday afternoon. Hopfully i can get this figured out and get the right chip and maybe this car be more impressive then it is now.
Thanks
Scott
 
1 - 7 of 7 Posts
Top