Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Valve Monkey
Joined
·
574 Posts
Discussion Starter · #1 ·
How can I tell if the fuel pump wiring in my GN has been upgraded (hotwired)? It's supposed to have a good aftermarket pump in it but I think the wiring may still be the weak factory stuff.

Thang-Q
Richard

------------------
Richard Gautier
'87 GN, TE61, blue tops,IC and a half,Champion iron heads, Roller rockers,ported intake and plenum,70mm TB, Houston DP, no times yet!
 

·
Registered
Joined
·
99 Posts
The thing that would stand out the most if it is a "Hot Wire Kit" is the ground to the gas tank. About 4-inches,braded steel.Also the positive wire has it's own jacket.And is feed from the ALT. to the tank.I just did mine a month ago, I go the one from CASPERS.

------------------
 

·
Registered
Joined
·
1,202 Posts
Originally posted by turbohitman:
The thing that would stand out the most if it is a "Hot Wire Kit" is the ground to the gas tank. About 4-inches,braded steel.Also the positive wire has it's own jacket.And is feed from the ALT. to the tank.I just did mine a month ago, I go the one from CASPERS.

Also the one from casper's mounts the relay back by the tank, it plugs in-between the factory plug to the fuel pump.
 
1 - 3 of 3 Posts
Top