Turbo Buick Forums banner

Hey Salvage

274 Views 1 Reply 2 Participants Last post by  salvageV6
I made a jumper out of a 5amp fuse female spade connecters and wire. with the key on engine off I still didn't get a light,I used the side of the case for a ground.
Where is the test hole at?
Thanks for your help

87 GN 3"ATR DP 2.5 ATR duals,7th injector,rebuilt turbo(stock)rebuilt injectors(stock).30 JE Pistons,accufab regulator,ATR super pump Hot wired,stainless driver side exhaust manifold.SOME ASSEMBLY STILL REQUIRED
1 - 2 of 2 Posts
Test hole is in the back of the alternator outer rim area of the case. Only round opening back there I think.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.