Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
400 Posts
Discussion Starter · #1 ·
Hello,
I am in the process of taking of the plenum to install an RJC power plate. But unfortunately there is one bolt that is causing me problems. I was wondering if anyone had a thought or idea to help me out. The bolt is on the passenger side in the back of the plenum, it's the one that has the 2 metal vacuum line attached to it. Pleasse HELP. Thanks!!
:confused: :dunno:
 

·
Premium Member
Joined
·
4,825 Posts
Slip a 19mm open end wrench on the metal flange and loosed the nut with a sharp hit to the ratchet.
 

·
Registered
Joined
·
400 Posts
Discussion Starter · #3 ·
Thanks earlbrown. It worked. Now to clean the inside of the pleneum & start re-assembling. Thanks again. :cheers:
 
1 - 3 of 3 Posts
Top