Turbo Buick Forums banner
1 - 5 of 5 Posts

·
Full Head Of Hair!!!!
Joined
·
4,347 Posts
Discussion Starter · #1 ·
Hey,
I blew my Fan/AC belt, and it looks like I gotta take off the Alternator belt which I did, and then the Waterpump/Crank/Powersteering belt :crazy:

Now in order to take off the Waterpump/Crank/Powersteering belt, there is a tensioner, but have no idea were to loosen it. I was thinking of taking the fan clutch off, then the shroad to make it easier :dunno:

-Joe S.
 

·
Full Head Of Hair!!!!
Joined
·
4,347 Posts
Discussion Starter · #3 ·
Art,

Sent ya a PM :cheers:
 

·
Free Door Removal
Joined
·
1,686 Posts
you figure this problem out yet?

I believe the power steering pump IS the tensioner, and you need to go through the pully to get one bolt, and the other is behind the pump.

Joe
 

·
Registered
Joined
·
298 Posts
You forgot the smog pump. No need to remove fan or shroud, you just loop the belt around the fan one blade at a time. You have to loosen the alternator, ps pump ect. They pivot off of one bolt, slip the new belt on, then set tension and tighten everything back up.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top