Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
62 Posts
Discussion Starter · #1 ·
Do fronts go on rear of GN, with rears and spacers on front of car or vice versa? Really don't want spacers on front. Looking at some on ebay and company says rears go on front with spacers and fronts on reat of car. What is right. How much of a spacer is needed? Thanks :)
 

·
Premium Member
Joined
·
4,001 Posts
search :yup:

four front gtas , you may want to run thin spacers for looks and may need torun them to run wide rear tires like 255/50-16s MTs , ( clearance varies from car to car)

or if you have a full set of four from a bird
install front gtas on the rear
install rear gtas on the front with 7/8" spacer and longer studs
some use the biilet type spacers that bolt on which saves the task of installing longer studs and then you can run gta rears on the rear , i wouldnt run spacers on the rear if you run sticky tires
 

·
Premium Member
Joined
·
967 Posts
or for the rears for the front you can use what is called et lugs that have a short extension on the lugs that goes thru the wheel and makes up threads that the spacer uses up.. 1.00 each usually..
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top