Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter · #1 ·
i have just installed #6,7 position body bushings and gone do the #5 "gnx" bushing i can see two holes in the area of where its supposed to go one is inside the coil spring and the other is in front of the coil spring im guessing it goes in front of the coil spring not in it. tried looking online but couldnt find any info. is this bushing even worth it to install or just waste of time?
 

·
2 GN's = No money!!
Joined
·
5,116 Posts
Number 5 (the GNX bushing) does not go in the coil spring.

Here is a link from GNTTYPE.org that has a good write up on it.

Bushing Replacement Procedure


There are also other write ups on body bushings there that may be of interest.


I hope this helps,
 

·
2 GN's = No money!!
Joined
·
5,116 Posts
As far as is it worth it to install the #5, since you are doing the rest why not add it? Buick thought it worth while to add to the GNX so there must be some use for it.

I had all of the body bushings (even #5) done in my car and I am happy with it. :yup:
 
1 - 3 of 3 Posts
Top