Turbo Buick Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
81 Posts
Discussion Starter · #1 ·
Since my motor got swapped out a few months back, none of my gauge lights work.I have a boost gauge on the a pillar, oil and water temp on the console. Is there a fuse or common ground somewhere that I should check? It sucks not being able to see my boost at night. TIA...Mark
 

·
Registered
Joined
·
6,966 Posts
Assuming they are all aftermarket I would simply follow the wires to the bulbs and whatever they use for a ground, either another wire or metal contact.

Check those two things and they will probably light up again.

If it affects the factory gauge lights check the 5 amp. InstLps. fuse and the dimmer.
 

·
Registered
Joined
·
81 Posts
Discussion Starter · #3 ·
Thanks Salvage, I will follow them out. They must share a ground somewhere, I'm sure thats it. Thanks man!
 

·
Registered
Joined
·
6,966 Posts
Actually they probably share a common +12 feed to something that was disconnected during the motor swap. I would use a meter or test lamp to see if you are losing power or ground to the lamps first. Then trace the proper wire to fix the problem.
 
1 - 4 of 4 Posts
Top