Turbo Buick Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
94 Posts
Discussion Starter · #1 ·
Since the weather was so nice yesterday afternoon, I took the opportunity to jack the car up and install the front connecting brace that I had gotten from Kirbans.

When I was underneath the front end, I saw that the car had a front sway bar installed.

See pics.

I'm trying to detemine if the the sway bar came stock from the factory or did the previous owner/s install one themselves.

Any insight would be appreciated.

Thanks
Scott
 

Attachments

·
YOU KNOW MY NAME!
Joined
·
5,673 Posts
What's the outside diameter?
 

·
Registered
Joined
·
94 Posts
Discussion Starter · #3 ·
Why didn't I think of that.

I'll measure it up this afternoon and get back to you.

Thanks again

Scott
 

·
Registered
Joined
·
415 Posts
If the front sway bar diameter is 1.25", then it should be the O.E. sway bar. Judging from the photos, it looks like there are aftermarket mounts with polyurethane bushings holding the sway bar to the frame.
 

·
aka: mOtOrHeAd MiKe
Joined
·
6,603 Posts
Take a picture at the end of the sway bar; if it is tubular it is likely aftermarket.
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top