Turbo Buick Forums banner
1 - 6 of 6 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 ·
What are some of the "free mods" again? I did a search on gnttype but found nothing. The reason I ask is mainly because i have the throttle body and plenum off and thought I remembered something about blocking off the coolant lines into the t-body? Is this common? Is it just those two little hoses that go from the t-body to the heater pipe? This would also save me a trip to Autozone wink

Kyle
 

·
Premium Member
Joined
·
43,735 Posts
Just loop a hose across the inlet and outlet on the metal pipe that supplies water to the heater core rather than connecting up the tb.

You might bellmouth the inlet to the tb with a dremel while it is off as well.
 

·
Missing 2 Cylinders???
Joined
·
1,150 Posts
While you got the throttle body off, you could bell mouth the inlet, also bell mouth both sides of the I/C. Make sure that you stuff a rag down in it, so that shavings do not fall into it.
 

·
Missing 2 Cylinders???
Joined
·
1,150 Posts
Sorry didn't see that Steve had already suggested the bell Mouth of the TB.

Anyways, go for the I/C as well. Mainly the inlet side from the turbo.
 

·
2FAST4U
Joined
·
376 Posts
I don't think that there is such a thing as "free" mods....Even if you do the work yourself, you still got to spend a few dollars once in a while for the parts.... :(
'bye!...
Claude

<small>[ March 28, 2003, 06:41 PM: Message edited by: toofastforyou ]</small>
 

·
Premium Member
Joined
·
43,735 Posts
once a party pooper, always a party pooper. :p
 
1 - 6 of 6 Posts
Top