Turbo Buick Forums banner

Copper sealer at turbo

679 views 12 replies 10 participants last post by  ghettosled 
#1 ·
Will this do any good at the elbow to turbo and the exhaust up-pipe to turbo?

TIA
ES
 
#2 ·
No. No.

------------------


Stock Block, Stock Cam, PTE-52, Champion Heads, V4, MSD50's, TH DP, JayJackson 62mm TB, 16position MaxEffort Chip. 3680# with Driver
12.0 @ 116.5mph w/20psi using 17.9* timing

mailto:mike@TurboBuicks.commike@TurboBuicks.com</A>
 
#5 ·
Maybe Maybe....

Used it on the header flange worked fine...

Not sure elsewhere....
 
G
#9 ·
The Ultra Copper works great those parts. i have put together lots of stock down pipe set ups with ulta copper on the stock doughnut and elbow to turbo for an extra insurance. I use it on my th dp to turbo, turbo to header and cross over. Great stuff.
So In My opinion Go for it

Yes yes....
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top