Turbo Buick Forums banner

1 - 7 of 7 Posts

·
Registered
Joined
·
890 Posts
Discussion Starter · #1 ·
hi guys need help have a code 41 says ecm or cam sensor is bad the car will run fine then the code comes up and the car wants to shut off? will not restart if i play with the wires on the cam sensor it will start and run temorarely what do you think the problem is? thanks crazy
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Did you remove the cap and see how it looks?
No cracks or fried wires etc?
 

·
Registered
Joined
·
890 Posts
Discussion Starter · #3 ·
Just a Six??:
Did you remove the cap and see how it looks?
No cracks or fried wires etc?
DID NOT REMOVE CAP BUT YOU CAN MOVE THE WIRES AND IT STARTS CAN WE STILL GET THEASE THINGS ? dunno
 

·
Registered
Joined
·
890 Posts
Discussion Starter · #4 ·
ANY HELP PLEASE!
 

·
Registered
Joined
·
2,098 Posts
You can get the cam sensor, from GM as far as I know, and definitely from the Turbo Buick vendors. Poston will sell you just the sensor for $60. The sensor with the drive shaft/oil pump drive is $270!!! Sounds a little high to me..
 

·
Fuhgeddaboudit
Joined
·
18,613 Posts
If you move the wires on the sensor and starts then either the sensor cap is bad or a bad weatherpack connection from the sensor to the engine harness. The sensor cap pn# 25518357 from GM. GMPartsdirect.com has it for $34.91 plus S&H.
Stay away from the aftermarket ones like Autozone sells eek!
 
1 - 7 of 7 Posts
Top