Joined
·
994 Posts
Here is the fitting I had custom made so we can drop the 044 in our fuel tanks. The fitting is 12mm x 1.5 to 5/16th. It has a machined lip on the end for a better grab on the hose.
I'm currently running it in my GN and it's the easiest way to get the 044 in our tanks.
Stainless Fitting = $37 shipped
Aluminum Fitting = Not sure, will look into pricing if enough want it.
I need around 10 orders to get the program up and running again for the pricing above as my one off was a hook up at $50.
FWIW, if you're running E85 you need the stainless fitting. I have a thread about what E85 does to aluminum fittings.
I'm currently running it in my GN and it's the easiest way to get the 044 in our tanks.
Stainless Fitting = $37 shipped
Aluminum Fitting = Not sure, will look into pricing if enough want it.
I need around 10 orders to get the program up and running again for the pricing above as my one off was a hook up at $50.
FWIW, if you're running E85 you need the stainless fitting. I have a thread about what E85 does to aluminum fittings.
