Turbo Buick Forums banner
1 - 8 of 8 Posts

·
Registered
Joined
·
6,105 Posts
Discussion Starter · #1 ·
Just read on the other board that the balancer bolt is a tty bolt and should be replaced. I see that they are still available and not very expensive. Any of you experts have an opinion on this? You do occasionally hear of people's balancers coming lose. :dunno:
 

·
Registered
Joined
·
6,105 Posts
Discussion Starter · #3 ·
I took one off once that was indeed lose. But, as you said, I torque mine to 220-230 with blue loctite and it hasn't come lose. I just wondered if it might be a safeguard since they are available and inexpensive. If they are tty, then the torque specs would be inaccurate.
 

·
Premium Member
Joined
·
43,735 Posts
you cannot believe everything you read.
 

·
Registered
Joined
·
732 Posts
TTY bolts with a tq spec in ft lbs would defeat the purpose of TTY. TTY bolts have to have a min. tq spec+ degrees of turn to be any kind of effective.

As I am always looking to learn, does anybody know of a TTY bolt not set by angle.
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top