Maybe I need one of those famous toggle switches to make it work right...
![]()
Audible KR Detector
What if any is the correlation between the scanmaster and the Caspers' Audible knock detector?
I got 4.2 degrees stored on the scanmaster and no beeps out of Caspers unit.
It did beep this morning when I started the car so I know something works on the thing.
I also have another light bar gray case meter that had a couple lights on it after the WOT run.
Not sure if it's a problem with too much load on the KR line but I doubt it since they should be very high impedance circuits.
Anyone know a relationship?
![]()
TIA
I got 4.2 degrees stored on the scanmaster and no beeps out of Caspers unit.
It did beep this morning when I started the car so I know something works on the thing.
I also have another light bar gray case meter that had a couple lights on it after the WOT run.
Not sure if it's a problem with too much load on the KR line but I doubt it since they should be very high impedance circuits.
Anyone know a relationship?
1 - 4 of 4 Posts
Nice link Rob, but it too is a tad short on technical information.
![]()
1 - 4 of 4 Posts
