Turbo Buick Forums banner
1 - 19 of 19 Posts

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #1 ·
I have some extra Brand New ARP Headstuds I will sell for 1/2 price at the meet on the 16th. The prices for these new are $100 to the door from the vendors. You can check Summit or Jegs etc. I actually paid $110 when all bills were totaled up with shipping to Canada & tax etc.
They need to go! 1/2 price cash deal! :cheers:

The price for the 16th meet is $50 per set.
2 sets- #123-4003 Stock Iron heads 6 or 12 point nuts (your choice)
1 set- #223-4204 Champion Aluminum heads 12 point nuts
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #2 ·
One of you guys grab some of these or I'll put them up on the other site & they will sell easily over there. One of you guys must need some head studs?
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #6 · (Edited)
Something Similar about you two & your VBulletin LOL!! :D




Do you want 3 sets? If you prefer send me a PM. :yup:
They come 12 point unless you ask for 6 point.
 

·
Registered
Joined
·
10,284 Posts
Something Similar about you two & your VBulletin LOL!! :D
Damn....BUSTED!!!!!!!!
If you'd like,I'll take care of things up this way and pass them on.
Trust me,I'd REALLY like to "pass them on".:D
 

·
Registered
Joined
·
58 Posts
Studs

David would you mind if the "Radius Kid" (John Perrins) to care of the purchase for me.John and I have worked on Turbo Buicks for quite awhile. He is the other half of CANUSA Motors LLc.I will see John on the way to BG.Please let me know if this plays for you.

Thanks Wayne
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #9 ·
I don't know?? Only known John for 20 years?? :D
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #11 ·
Ain't life wonderful.
Wayne's probably polishing his "Yacht" right now.
Wayne sent a PM so 1 set set iron head studs pending.
I still have more sets of each. For $50 you are getting a DEAL!! :yup:
I'll give it till Sunday & then off to the other site.
They will sell in 2 days easily!!!! :cheers:
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #12 ·
Both sets for Iron Heads Sold! Thanks guys! :cheers:

1 set left for Aluminum GN-1 heads.
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #14 ·
Can you measure the short studs for me overall length? for the GN1 heads
Norbs 3 3/4 inches (same as the stock heads shortest ones)
Thats with my ruler.
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #16 · (Edited)
Just for future reference.
Stock Iron Heads...3 3/4 - 4 1/4 - 4 3/4
GN-1 Aluminum.....3 3/4 - 4 1/4 - 5
The GN-1 have a few extra threads on the 4 longest (top row outer) with 2 per head. An extra washer would easily take up the extra few threads if it was needed? I thought I read that with 6 point nuts you need 7 threads to work with them to have enuf meat to torque evenly. So 7 or 11 would make little difference as long as the threads are in the head deep enuf.
I'll have to check next time it's all apart or I put together this new one.
 

·
OK! Who Farted Again??
Joined
·
17,852 Posts
Discussion Starter · #18 ·
John it's handled but too bad you wont be there Sunday.
Cheers! :cheers:
 
1 - 19 of 19 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top