Turbo Buick Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
200 Posts
Discussion Starter · #1 ·
Couple questions here. I know how to install the intake if I didnt I shouldn't be working on any car haha. My question lies with relocating the charcoal canister thing.
1)does it move down onto the frame where the mount for original air cleaner housing was? Use the existing holes/bolts from original setup?
2)do any of the hoses/lines connected to the canister have to be modded in anyway?
3)do I leave the "scoop" from original box that goes up in behind the headlight in place?
Any pics would be great. Thanks.
 

·
Premium Member
Joined
·
1,014 Posts
Yes it goes on the frame in the same hole as the bracket for the air cleaner. Remove the black plastic snorkel from the front as well. No mods to the hoses or wires. Just have to drill the hole for the Ats in the KN filter. It's pretty straight forward LJ.
 

·
Registered
Joined
·
200 Posts
Discussion Starter · #3 ·
So I shouldn't have removed the bracket from the frame rail? I was thinking bolt it down to frame in those 2 bolt holes where that bracket was. Is that correct? I know it's straight forward just wanna make sure I do it correctly
 
1 - 3 of 3 Posts
Top