Do 60 pounders work well with a relatively stock car if a TT chip is used. Plan on some serious upgrades in the future but I need to replace stock injectors now
Worked out fine for me. One or more of my stock injectors was leaking, so I replaced em with the 60#ers and got the TT chip. Just about everything else on my car was stock, aside from the fuel pressure reg. You likely won't be able to pass emissions, though. :cheers:
I have the 60/65 mototrons in my car, the car runs great with a Turbo Tweak chip. When I ordered the chip from Eric I had him also burn me a 60/65lb. emissions chip for inspection.
Thanks for replys, not worried about emissions since I am in KS. Yes I have 3 injectors leaking and need to replace now, where is best price to be had on these injectors? Thanks
I've installed a couple sets, there the best working injector i've seen with the stock computer, used Bob B chips from Fullthrottle. IMO you can't go wrong with these 60-65#injectors.
I've installed a couple sets, there the best working injector i've seen with the stock computer, used Bob B chips from Fullthrottle. IMO you can't go wrong with these 60-65#injectors.
Is there a 55-60 lb and a 60-65 lb siemens/mototron injector or are these the same part? BTW,your in the 9's with these? :eek!: I have a set of these and want to clarify,thanks.
It's the Hi-Z 60 Mototron (some vendors call them 65's) that you want for a stock computer. there's 55 and 65 low ohm that need comuter driver mods to work correctly. They are not Mototrons.
I install these in other cars, I run 83's with a Fast.
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
Turbo Buick Forums
881.8K posts
20.5K members
Since 2000
A forum community dedicated to Buick Regal and Grand National owners and enthusiasts. Come join the discussion about performance, modifications, classifieds, troubleshooting, maintenance, and more!