Turbo Buick Forums banner

1 - 5 of 5 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter · #1 ·
1979 Z28 New paint with a lot of pearl (1998 Rolls Royce Blue Pearl), new stripes, new front and back glass, new seals doors, T Tops and trunk, new emblems, new grill, new package tray interior trim, new shocks, Weld wheels with brand new center caps and Mickey Thompson tires, set of 79 Z28 Turbine wheels with brand new original Z28 center caps and lug nuts, polished SS AC delete plate. Floors, trunk, frame rails and body all in excellent condition before paint.

383 stroker 500HP still on engine cradle built by Terry Smith of Horsepower Sales Cincinnati, Ohio $8000+ include hyd. roller cam, full roller rockers, Victor Junior polished, Dart Pro1 heads, 10.75-1, Holley 750HP, 7 qt oil pan too much to list (link to dyno run https://www.facebook.com/photo.php?v=346135398837283&set=vb.401139559976993&type=2&theater).

New in box not installed yet: Heddman ceramic coated headers, Pypes SS exhaust system, Billet Specialties Serpentine drive system, bowtie chrome alternator, MSD spark plug wires, Spectre high flow air breather assembly, Bowtie chrome valve cover breathers, chrome master cylimder lid, chrome support bars, chrome rad. support, new rad. support bushings, high torque starter, Autometer Sport Comp gauges 5" speedo and tach, 2 1/16 oil pressure, water temp, fuel, volt and vacuum, polished aluminum over flow bottle and vacuum reservoir, Taylor aluminum battery relocation kit, energy suspension motor and transmission mounts, original Z28 seat covers back and front, new seat foams front seats and the back foam is perfect, new dual electric fan controller, new door panels, new B&M console mount Mega shifter, all new T Top trim pieces, new carpet, frame perfect and painted, engine compartment painted, floor painted with POR15 and sound proofed, new door sill plates and a lot more I'm sure I didn't list. I have been working on this car for over 4 years and due to vision problems I will not be able to enjoy when it's finished. I have invested over $20000 and a lot of time in this project.
$15500 or I would consider a very nice 1987 Grand National or 2002 6 speed Firehawk in trade.
Call or email me for more information or pictures. Serious inquires only please.
Ed
513 708 9456
[email protected]
 

Attachments

·
Registered
Joined
·
11 Posts
Discussion Starter · #2 ·
CAR STILL AVALIABLE

1979 Z28 New paint with a lot of pearl (1998 Rolls Royce Blue Pearl), new stripes, new front and back glass, new seals doors, T Tops and trunk, new emblems, new grill, new package tray interior trim, new shocks, Weld wheels with brand new center caps and Mickey Thompson tires, set of 79 Z28 Turbine wheels with brand new original Z28 center caps and lug nuts, polished SS AC delete plate. Floors, trunk, frame rails and body all in excellent condition before paint.

383 stroker 500HP still on engine cradle built by Terry Smith of Horsepower Sales Cincinnati, Ohio $8000+ include hyd. roller cam, full roller rockers, Victor Junior polished, Dart Pro1 heads, 10.75-1, Holley 750HP, 7 qt oil pan too much to list (link to dyno run https://www.facebook.com/photo.php?v=346135398837283&set=vb.401139559976993&type=2&theater).

New in box not installed yet: Heddman ceramic coated headers, Pypes SS exhaust system, Billet Specialties Serpentine drive system, bowtie chrome alternator, MSD spark plug wires, Spectre high flow air breather assembly, Bowtie chrome valve cover breathers, chrome master cylimder lid, chrome support bars, chrome rad. support, new rad. support bushings, high torque starter, Autometer Sport Comp gauges 5" speedo and tach, 2 1/16 oil pressure, water temp, fuel, volt and vacuum, polished aluminum over flow bottle and vacuum reservoir, Taylor aluminum battery relocation kit, energy suspension motor and transmission mounts, original Z28 seat covers back and front, new seat foams front seats and the back foam is perfect, new dual electric fan controller, new door panels, new B&M console mount Mega shifter, all new T Top trim pieces, new carpet, frame perfect and painted, engine compartment painted, floor painted with POR15 and sound proofed, new door sill plates and a lot more I'm sure I didn't list. I have been working on this car for over 4 years and due to vision problems I will not be able to enjoy when it's finished. I have invested over $20000 and a lot of time in this project.
$15500 or I would consider a very nice 1987 Grand National or 2002 6 speed Firehawk in trade.
Call or email me for more information or pictures. Serious inquires only please.
Ed
513 708 9456
[email protected]
The car is still avaliable for $14500 or possibly trade for nice 87 GN.

here's a little more information on the engine:

383 stroker 500HP still on engine cradle built by Terry Smith of Horsepower Sales Cincinnati, Ohio $8000+ includes hyd. roller cam, full roller rockers, Victor Junior polished, Dart Pro1 heads, 10.75-1, Holley 750HP, braided dual feed carb fuel line, 7 qt oil pan, high volume oil pump, polished Bowtie valve covers, Wiend polished aluminum high flow water pump, holley fuel pump, MSD wires, polished aluminum water neck, distributor custom curved for this engine, billet aluminum distributor hold down, SFI flexplate, Billet Specialties Serpentine polished aluminum drive system too much to list and everything is new. Link to dyno run below. https://www.facebook.com/photo.php?v=346135398837283&set=vb.401139559976993&type=2&theater).

Call or email Ed 513 708 9456 [email protected]
 

·
Registered
Joined
·
11 Posts
Discussion Starter · #3 ·
PRICE REDUCED

The car is still avaliable for $14500 or possibly trade for nice 87 GN.

here's a little more information on the engine:

383 stroker 500HP still on engine cradle built by Terry Smith of Horsepower Sales Cincinnati, Ohio $8000+ includes hyd. roller cam, full roller rockers, Victor Junior polished, Dart Pro1 heads, 10.75-1, Holley 750HP, braided dual feed carb fuel line, 7 qt oil pan, high volume oil pump, polished Bowtie valve covers, Wiend polished aluminum high flow water pump, holley fuel pump, MSD wires, polished aluminum water neck, distributor custom curved for this engine, billet aluminum distributor hold down, SFI flexplate, Billet Specialties Serpentine polished aluminum drive system too much to list and everything is new. Link to dyno run below. https://www.facebook.com/photo.php?v=346135398837283&set=vb.401139559976993&type=2&theater).

Call or email Ed 513 708 9456 [email protected]
$14000 or OBO 87 GN and T Type trades considered.
Thanks
 
1 - 5 of 5 Posts
Top