Turbo Buick Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 ·
Do any of the manufacturers of the mandrel bent 3" GN/TR exit tailpipes make them with the OEM styled "L" shaped hanger tabs so that they will fit the rear OEM rubber padded hangers (near the end of the tailpipes) instead of the typical "drill a hole in the frame next to the rear quater panel frame rail" type generic metal "L" bracket? Thanks
 

·
Retired
Joined
·
1,966 Posts
Yes, ATR's dual 3" system has the stock location L shaped brakets to fit the stock hangers.
Not sure about their other systems.



------------------
TurboDave & Kathy Huinker, mailto:[email protected][email protected]</A>
TurboD Racing,Turbo Buick Web Ring
San Diego CA http://home.san.rr.com/buickv6/
86 GN[email protected](MM/MAF Xlator/Extender,MM BstC Boost Command,THDP,PTE44,CAS V2FM,MSD50's,9.5"vigilante 3500)
87 GN [email protected](Stock)
84 Z28 L69
01 Excursion LTD TTS"race" chip 7.3L PSD(power stroke diesel) Turbo 4X2
Pictures of my toys
 

·
Registered
Joined
·
309 Posts
ATR's 2 1/2 exhaust now comes with the 'L' shaped bracket...explanation from ATR was too many people complained about having to drill a hole in the frame for the old style bracket...
 
1 - 4 of 4 Posts
Top