Turbo Buick Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
83 Posts
Discussion Starter · #1 ·
when running alky injection...do you still look for 760-780 millivolt for o2 reading...or does it change because of the alky in the mix??
 

· Village Idiot
Joined
·
4,832 Posts
You should be OK if you don't have knock at that level. My alky use is street only so I usually leave a litle margin for safety & run about .790-.810mv. I dilute the mix with 60% water so don't think the denatured really affects the O-2s.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top