Turbo Buick Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
68 Posts
Discussion Starter · #1 ·
I was wondering if anyone could help me out with something? I am looking part numbers on the 009 injectors and the company tht makes them.
Are these good injectors for a street car that may see the track 3-4 times a year?
Thanks.
 

·
Fuhgeddaboudit
Joined
·
18,613 Posts
Post what has been done to the car.. If you don't have the peformance upgrades to go with the extra fuel you will see no improvement or go slower..

------------------
ED BAKER
87-T-TYPE, PT54,MSD50's,Crane Billet Roller,JE forged20over,P&P Heads,Manley valves,Hemco 65mm& Acu65TB,V2 FM, P.I.9.5 -7disc,Jimmys Trans, new times soon.
93 PARK AVE"SUPERCHARGED"
67RS/SS350 CAMARO
mailto:[email protected][email protected]</A>
http://www.modernmusclecar.net
 

·
Registered
Joined
·
1,693 Posts
From post the 009 are good and will support good power but some people have a stumble with them. Post say Jim Testa chips work good with the 009.
 

·
Premium Member
Joined
·
43,735 Posts
Made by Lucas...I forget the new number. Very good injectors. Most of the vendors have them. 42.5# is the normal rating.
 

·
Premium Member
Joined
·
43,735 Posts
621031 is the number.
 

·
Registered
Joined
·
68 Posts
Discussion Starter · #6 ·
The mods I have done to the car are:
18" K&N Filter behind the grille
Walbro 340
Hotwire kit
Kenne Belle Knock Detector
ADS chip (cheap, was in the car when bought)
Dual Flowmasters (soon to be Ultra Flows)
All new Energy Suspensions Body Mounts
3 A Pillar gauges (boost, temp, and air/fuel)

My engine is apart right now for a freshening, going to put in a new 205 cam and have my heads ported and polished, plus all the other stuff (new oil pump, valve springs, etc.)

Would the 009's be a good injector to run with these mods?
 

·
Registered
Joined
·
279 Posts
I run them with nearly a stock set up with no problems. Some people have had a tipin stumble with these inj, but I never did. It depends on the chip and other factors, I guess.

Regards
ks

------------------


http://www.geocities.com/kdslaby/Tech_Page_Glossary.html


87 GN
12.05 @ 111, 1.60 60', 15psi launch
RA107

New mods @ 20 psi: 12.44 @ 107 60' 1.71.... With problems
JJ 62mm
MaxEffort, 22psi
Race fuel only for street
No more 92 octane for this car:)

http://www.geocities.com/kdslaby/solidworks.html
 
1 - 10 of 10 Posts
Top