TurboBuicks.com - View Single Post - TA BLOCK/HEADS STREET MOTOR BUILD-UP
View Single Post
Old 04-07-2010, 12:43 AM   #5 (permalink)
william brophy
Registered User
 
william brophy's Avatar
 
Join Date: Jan 2004
Posts: 1,261
#5 set of pics. Aftermarket Champion intake. Engine has been on the street for a while now with no oil leaks or burning. Using OEM oil pump gears, pressure hot at 900 rpm idle= 25/28 psi, pressure at W.O.T.= 65 psi (pressure of relief spring) using 15/50 wt. oil.
Attached Thumbnails
TA BLOCK/HEADS STREET MOTOR BUILD-UP-p1000939.jpg   TA BLOCK/HEADS STREET MOTOR BUILD-UP-p1000941.jpg   TA BLOCK/HEADS STREET MOTOR BUILD-UP-p1000959.jpg   TA BLOCK/HEADS STREET MOTOR BUILD-UP-p1000960.jpg   TA BLOCK/HEADS STREET MOTOR BUILD-UP-p1000961.jpg  

__________________
WE4 HARDTOP @3700 lbs., WIND-UP WINDOWS, BUILT 200-4R, OEM REAR, OEM COMPUTER, AIR CONDITIONED, ETC.= "9" Second street car @ 22 psi on foot brake, 0 Boost launch.
GOD BLESS AMERICA

Last edited by william brophy; 04-07-2010 at 11:32 AM.
william brophy is offline   Reply With Quote