| | | | | | |
| | | | | ||
| | | | | ||
| | | | | ||
| | | | | ||
| | | | |||
 |
01-06-2008, 08:38 PM
| #1 (permalink) |
| TURBOWTIE  Join Date: Oct 2006 Location: Maple, Ontario, Canada
Posts: 229
| .gif animated avatar Hi Mike I know this is kinda petty , An older image I used on my avatar way back when.. had replaced the .gif image that I used up untill the crash. Before the crash I had no prob uploading my av that was 74 x 44 , 16 'ish KB, 4 frames, ( within the 75 by 75 pixels or 19.5 KB limit ) see attachment . When I try to upload a previously used animated avatar I receive the msg - " You may not upload animated images." I noticed that some of the Pre-defined Standard Avatars are animated, up to 73 KB and one has 182 frames ! Any chance .gif animated images on av's can be uploaded in the future? Other than that , this is a fantastic site and your time and effort is appreciated by many. Thanks Steve. 
__________________  1980 Monte Carlo Turbo 1 of 706 made for export ( metric ) Conversion from factory LC8 Turbo V6 to V8 then '87 LC2/200r 12-bolt. Stock turbo, stock injectors, stock I/C, comp 212/212 cam, LT1 springs, 2800 stall, hotwired Walbro, adj fp reg, K & N, Powerplate, 3" Kirban dp ported stock elbow, dual Hooker super comp mufflers, a chip, Turbosmart, Air bags, adj. upper control arms, Scanmaster 2.1, Bettie Page air freshener. Check it out |
|  |
|
01-07-2008, 08:35 AM
| #2 (permalink) |
| Resident Idiot  Join Date: Sep 2000 Location: Orlando, FL USA
Posts: 10,110
 | Give it try again, should work fine now. Thanks,
__________________ Check Out MikesStuff4Sale.com to view my used parts!  ------------------------------------------------ 1987 Buick Grand National Budget 4.1, 204/214 cam, TA-49 Turbo, Stockish Heads, V4, MSD50's, TH DP, JayJackson 62mm TB, Translator plus Extender powered. 3680# with pilot ------------------------------------------------ 1987 Turbo T with 5,888 Original miles FOR SALE! ------------------------------------------------ 1993 Mazda RX-7 4.1 Buick Powered 11.20 @ 128mph (2.4 60')!  |
| |
|
01-07-2008, 11:22 PM
| #3 (permalink) |
| TURBOWTIE Join Date: Oct 2006 Location: Maple, Ontario, Canada
Posts: 229
| Hi again I'm getting the " unable to save image " when loading from my hd and from Lunapic. Tried a few, all shapes and sizes , all within the max specified. No rush. Thanks Steve.
__________________ 1980 Monte Carlo Turbo 1 of 706 made for export ( metric ) Conversion from factory LC8 Turbo V6 to V8 then '87 LC2/200r 12-bolt. Stock turbo, stock injectors, stock I/C, comp 212/212 cam, LT1 springs, 2800 stall, hotwired Walbro, adj fp reg, K & N, Powerplate, 3" Kirban dp ported stock elbow, dual Hooker super comp mufflers, a chip, Turbosmart, Air bags, adj. upper control arms, Scanmaster 2.1, Bettie Page air freshener. Check it out |
|
| |
|
01-07-2008, 11:26 PM
| #4 (permalink) |
| Resident Idiot Join Date: Sep 2000 Location: Orlando, FL USA
Posts: 10,110
| Changed some permissions, try again! Thanks.
__________________ Check Out MikesStuff4Sale.com to view my used parts! ------------------------------------------------ 1987 Buick Grand National Budget 4.1, 204/214 cam, TA-49 Turbo, Stockish Heads, V4, MSD50's, TH DP, JayJackson 62mm TB, Translator plus Extender powered. 3680# with pilot ------------------------------------------------ 1987 Turbo T with 5,888 Original miles FOR SALE! ------------------------------------------------ 1993 Mazda RX-7 4.1 Buick Powered 11.20 @ 128mph (2.4 60')! |
|
| |
|
01-07-2008, 11:40 PM
| #5 (permalink) | |
| TURBOWTIE Join Date: Oct 2006 Location: Maple, Ontario, Canada
Posts: 229
| Quote:
same msg.
__________________ 1980 Monte Carlo Turbo 1 of 706 made for export ( metric ) Conversion from factory LC8 Turbo V6 to V8 then '87 LC2/200r 12-bolt. Stock turbo, stock injectors, stock I/C, comp 212/212 cam, LT1 springs, 2800 stall, hotwired Walbro, adj fp reg, K & N, Powerplate, 3" Kirban dp ported stock elbow, dual Hooker super comp mufflers, a chip, Turbosmart, Air bags, adj. upper control arms, Scanmaster 2.1, Bettie Page air freshener. Check it out | |
|
| |
|
01-07-2008, 11:47 PM
| #6 (permalink) |
| TURBOWTIE Join Date: Oct 2006 Location: Maple, Ontario, Canada
Posts: 229
| also same msg for this .jpg just to see if it would take edit- I'll try again tomorrow, thanks.
__________________ 1980 Monte Carlo Turbo 1 of 706 made for export ( metric ) Conversion from factory LC8 Turbo V6 to V8 then '87 LC2/200r 12-bolt. Stock turbo, stock injectors, stock I/C, comp 212/212 cam, LT1 springs, 2800 stall, hotwired Walbro, adj fp reg, K & N, Powerplate, 3" Kirban dp ported stock elbow, dual Hooker super comp mufflers, a chip, Turbosmart, Air bags, adj. upper control arms, Scanmaster 2.1, Bettie Page air freshener. Check it out Last edited by 1980monteturbo : 01-08-2008 at 12:26 AM. |
|
| |
 |
| Thread Tools | |
| Display Modes | |
| |
Similar Threads | ||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Dumbest avatar ever | Zap | The Waiting Room | 32 | 12-29-2006 03:51 PM |
| Can't change my avatar... WTF? | J Banning | The Waiting Room | 11 | 08-10-2006 06:52 PM |
| Who Had That Spooling Turbo Avatar .GIF? | 6 Bangr | The Waiting Room | 5 | 02-22-2006 10:39 AM |
| Animated avatars | Be4U | Parts For Sale | 5 | 06-04-2005 07:36 PM |
| How do you shrink a .gif file for use as an avatar? | Nasty Wendy | The Waiting Room | 5 | 02-04-2004 02:28 PM |
Linear Mode
