BOP Reynolds, Ga Nov 3rd-4th

Ttype83 · 10-09-2006, 01:31 AM

It is quikly coming up, so you bums should have already put in for your time off to come. I will be there both days this year

Hoping to meet everyone again, OK I don't remember half of the people I've met there..I'll have the 86 there this year. I'll make sure to drag Earl there on Saturday

Here's a link: http://www.buickgsca.com/SEMCC.htm
Just so you know how I am...I'm the one with the bucket on his head

Otto J · 10-09-2006, 07:21 AM

Whats that crazy bastard Rob holding? Some kind of detonator?

Russ Merritt · 10-09-2006, 08:42 AM

Quote:

Originally Posted by Otto J

Whats that crazy bastard Rob holding? Some kind of detonator?

Recklessrob · 10-09-2006, 12:38 PM

Hey, aren't you guys supposed to be looking for snakes ?

Orlando_87GN · 10-09-2006, 01:02 PM

In my opinion that event has gone down the tubes once again as it's run by the GSCA. Last year I went, myself and anyone else selling anything got hassled as there is apparently a $200 fee to sell parts of any kind now. Hey, it's their event and they can do what they want, but the event is tiny in the eyes of a $200 'vendor' fee. I got hassled so much I finally caved and put my few parts I had in the trunk. Then I got hassled again about the TurboBuicks.com sign I had on my Ez-up and was told I needed to pay $200 because 'it's a commercial sign'. I was nowhere near the 'vendor' area. I was in the pits with a 10'x10' ez-up and my GN.

Just as your typical GSCA BS goes, I walked around and asked people that were selling parts if THEY had to pay $200 and the answer was NO. It was clear I was being singled out. Bennet Jones is the one that was giving me a hard time and Richard Lassiter pretty much agreed with anything he said. These guys are all about the money and could care less about your safety, well being or the experience you have at one of these events.

I am going to pass on this years Reynolds event most likely. I'd love to go and visit with the usual friends but I can't stand the thought of lining the pockets of those that run the event.

Anyone else feeling the same way can attend a brand new BOPC event in Gainesville FL this December. I plan on attending that and will post some details when I find the dates.

87natty · 10-09-2006, 03:00 PM

87GTA-turbo · 10-09-2006, 04:30 PM

Quote:

Originally Posted by Orlando_87GN

Anyone else feeling the same way can attend a brand new BOPC event in Gainesville FL this December. I plan on attending that and will post some details when I find the dates.

I think this is what your looking for.
On DEC 2
For more info and hotel information visit our website bopcracing.com

Ttype83 · 10-09-2006, 05:17 PM

Mike,
Sorry you aren't going this year. I see that they raised the price this year

$200 for vendor fees is WAY TO MUCH for such a small event. I guess they are hassling you because you run a site were truth is not censored

I'll check my schedule and see if I can add in the Dec 2 event. Maybe we can get Eric to go, I don't think it's too far from him.

Ttype83 · 10-31-2006, 11:47 AM

It's this weekend

Can't wait to see some of you guys run again and meet some friends and some new folks.

The Radius Kid · 10-31-2006, 01:10 PM

Quote:

Originally Posted by Orlando_87GN

In my opinion that event has gone down the tubes once again as it's run by the GSCA. Last year I went, myself and anyone else selling anything got hassled as there is apparently a $200 fee to sell parts of any kind now. Hey, it's their event and they can do what they want, but the event is tiny in the eyes of a $200 'vendor' fee. I got hassled so much I finally caved and put my few parts I had in the trunk. Then I got hassled again about the TurboBuicks.com sign I had on my Ez-up and was told I needed to pay $200 because 'it's a commercial sign'. I was nowhere near the 'vendor' area. I was in the pits with a 10'x10' ez-up and my GN.

Just as your typical GSCA BS goes, I walked around and asked people that were selling parts if THEY had to pay $200 and the answer was NO. It was clear I was being singled out. Bennet Jones is the one that was giving me a hard time and Richard Lassiter pretty much agreed with anything he said. These guys are all about the money and could care less about your safety, well being or the experience you have at one of these events.

I am going to pass on this years Reynolds event most likely. I'd love to go and visit with the usual friends but I can't stand the thought of lining the pockets of those that run the event.

Anyone else feeling the same way can attend a brand new BOPC event in Gainesville FL this December. I plan on attending that and will post some details when I find the dates.

That's what happens when you deal with a lawyer[Jones] and "school teacher"[Lassiter].

earlbrown · 10-31-2006, 02:17 PM

Well damn. I'd planned on going thinking it was a relaxed weekend. Anybody know if that's the case or is it going to be a drama fest?

If it's the latter I might as well stay home and work on my Nasty 4.1 block.

Long Duk Dong · 10-31-2006, 04:05 PM

Quote:

Originally Posted by earlbrown

Well damn. I'd planned on going thinking it was a relaxed weekend. Anybody know if that's the case or is it going to be a drama fest?

If it's the latter I might as well stay home and work on my Nasty 4.1 block.

Hey b*tch, you better be there. I wonder if I duct tape Donna and drag her over if she would have me locked up. Once I get her there she is your problem!!!

Jim C.

earlbrown · 10-31-2006, 04:34 PM

Sounds like a plan. You duct tape her up and I'll cut her loose

. (I'd be monday before she could lock you up anyway

)

I need some more crazy in my diet pretty badly.

Jim Rodgers · 10-31-2006, 04:46 PM

I will be there with my GS again, and look forward to seeing the turbo cars ripping it up. I hope the track is better this year, because it sucked last year, like bad.

I especially liked watching Hartline back bumper it for 400 feet a few years ago. I think I have that on tape some place.

Grumpy · 10-31-2006, 04:52 PM

hey guys I got a new chainsaw

wish Melissa and I could have made it ... have fun and report back

10-09-2006, 01:31 AM	#1 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	BOP Reynolds, Ga Nov 3rd-4th It is quikly coming up, so you bums should have already put in for your time off to come. I will be there both days this year Hoping to meet everyone again, OK I don't remember half of the people I've met there..I'll have the 86 there this year. I'll make sure to drag Earl there on Saturday Here's a link: http://www.buickgsca.com/SEMCC.htm Just so you know how I am...I'm the one with the bucket on his head __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6 Last edited by Ttype83 : 10-09-2006 at 01:36 AM.

10-09-2006, 12:38 PM	#4 (permalink)
Recklessrob Booted from the 2nd Floor Join Date: Jun 2004 Location: Derry,NH Posts: 177	Hey, aren't you guys supposed to be looking for snakes ? __________________ Rob "Live Free or Die !" Independent Amsoil Dealer

10-09-2006, 01:02 PM	#5 (permalink)
Orlando_87GN Resident Idiot Join Date: Sep 2000 Location: Orlando, FL USA Posts: 10,359	In my opinion that event has gone down the tubes once again as it's run by the GSCA. Last year I went, myself and anyone else selling anything got hassled as there is apparently a $200 fee to sell parts of any kind now. Hey, it's their event and they can do what they want, but the event is tiny in the eyes of a $200 'vendor' fee. I got hassled so much I finally caved and put my few parts I had in the trunk. Then I got hassled again about the TurboBuicks.com sign I had on my Ez-up and was told I needed to pay $200 because 'it's a commercial sign'. I was nowhere near the 'vendor' area. I was in the pits with a 10'x10' ez-up and my GN. Just as your typical GSCA BS goes, I walked around and asked people that were selling parts if THEY had to pay $200 and the answer was NO. It was clear I was being singled out. Bennet Jones is the one that was giving me a hard time and Richard Lassiter pretty much agreed with anything he said. These guys are all about the money and could care less about your safety, well being or the experience you have at one of these events. I am going to pass on this years Reynolds event most likely. I'd love to go and visit with the usual friends but I can't stand the thought of lining the pockets of those that run the event. Anyone else feeling the same way can attend a brand new BOPC event in Gainesville FL this December. I plan on attending that and will post some details when I find the dates. __________________ Check Out MikesStuff4Sale.com to view my used parts! ------------------------------------------------ 1987 Buick Grand National Budget 4.1, 204/214 cam, TA-49 Turbo, Stockish Heads, V4, MSD50's, TH DP, JayJackson 62mm TB, Translator plus Extender powered. 3680# with pilot ------------------------------------------------ 1993 Mazda RX-7 4.1 Buick Powered 11.20 @ 128mph (2.4 60')!

10-09-2006, 03:00 PM	#6 (permalink)
87natty Register Boozer Join Date: Mar 2003 Location: South San Diego Posts: 3,726	__________________ 'What do you know about surfing? You're from G*ddamn New Jersey!'

10-09-2006, 05:17 PM	#8 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	Mike, Sorry you aren't going this year. I see that they raised the price this year $200 for vendor fees is WAY TO MUCH for such a small event. I guess they are hassling you because you run a site were truth is not censored I'll check my schedule and see if I can add in the Dec 2 event. Maybe we can get Eric to go, I don't think it's too far from him. __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6 Last edited by Ttype83 : 10-09-2006 at 10:46 PM.

10-09-2006, 07:21 AM	#2 (permalink)
Otto J \l/ Were winners go! Join Date: Apr 2001 Location: Stratford CT Posts: 1,995	Whats that crazy bastard Rob holding? Some kind of detonator?

10-31-2006, 11:47 AM	#9 (permalink)
Ttype83 Resident Slut Join Date: May 2001 Location: Newnan,Ga Posts: 5,295	It's this weekend Can't wait to see some of you guys run again and meet some friends and some new folks. __________________ Jim Seaton 83 T type Limited CarbedHotAir Slug ET 14.342 @ 94.67mph 14 psi boost, 2.080 60' Comp Cams will never get another dime of my money 86 White moon roof T-type, Stock IC & Turbo, Razor Alky, 50lb inj, Hotwire & fuel pump, tt chip, 2800 stall pats TC, R.Merritt plug wires & Trans, parts by Grumpy and his 3" single shot exhuast (No goals) Wifes toys:2004 Ram 1500 Quadcab Solar Yellow(HEMI) 2006 HD 1200C Sporty 1990 Camaro V6 (Daughter's beater) 1980 C3 Vette ...another project DSR member #6

10-31-2006, 02:17 PM	#11 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 3,479	Well damn. I'd planned on going thinking it was a relaxed weekend. Anybody know if that's the case or is it going to be a drama fest? If it's the latter I might as well stay home and work on my Nasty 4.1 block. __________________ PORN: It's not just for breakfast, lunch, and dinner anymore Last edited by earlbrown : 10-31-2006 at 02:21 PM.

10-31-2006, 04:34 PM	#13 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 3,479	Sounds like a plan. You duct tape her up and I'll cut her loose . (I'd be monday before she could lock you up anyway ) I need some more crazy in my diet pretty badly. __________________ PORN: It's not just for breakfast, lunch, and dinner anymore

10-31-2006, 04:46 PM	#14 (permalink)
Jim Rodgers Registered User Join Date: Sep 2006 Posts: 318	I will be there with my GS again, and look forward to seeing the turbo cars ripping it up. I hope the track is better this year, because it sucked last year, like bad. I especially liked watching Hartline back bumper it for 400 feet a few years ago. I think I have that on tape some place.

10-31-2006, 04:52 PM	#15 (permalink)
Grumpy Registered User Join Date: Sep 2000 Location: Andover, Ma Posts: 11,105	hey guys I got a new chainsaw wish Melissa and I could have made it ... have fun and report back __________________ Dan dont run your mouth if you cant run your car 86/87 GN and 89 TTA .. tons of parts !! Time to get out! Stuff has to go !!! Otherwise I am cutting it up and throwing it away email ttastage2@yahoo.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode