Need to replace gauge lens...

Scott89TTA · 06-01-2008, 09:33 AM

Well broke yet another part on my car while installing my new parts...I have lost count of how many bolts I have broke

This time I was installing my new ALKY Control kit along with new Autometer boost and electric fuel gauge (pillar pods) so I had removed the pillar and bottom dash panel. I decided to relocate my Scanmaster while I was at it and also fix a missaligned dash gauge frame. So while removing the gauge frame it some how got caught on the bottom of clear lens and snapped the bottom half of the speedo lens...cracked from the bottom left up across the trip reset and across to the right side...I am so frickin' pissed

So where can I get a replacement gauge lens ?

thanks,
Scott

Grumpy · 06-01-2008, 12:15 PM

lemme look in my stuff...

Scott89TTA · 06-02-2008, 11:51 AM

Hey Dan any luck on the gauge lens ?

Thanks,
Scott

Grumpy · 06-02-2008, 12:31 PM

I didn't find anything BUT I may have it in the attic

can't get it at the dealer or local junkyard ??

Scott89TTA · 06-02-2008, 01:08 PM

Quote:

Originally Posted by Grumpy

I didn't find anything BUT I may have it in the attic

can't get it at the dealer or local junkyard ??

I'm going to check...

Scott

turbofish38 · 06-02-2008, 03:59 PM

GM Part Number 25084190. Still available. Same part as on the other Firebird models.

Scott89TTA · 06-02-2008, 09:19 PM

Quote:

Originally Posted by turbofish38

GM Part Number 25084190. Still available. Same part as on the other Firebird models.

Thanks Bro...that's exactly what I needed to know

ordered p/n 25084190 through GM Parts Direct: Your direct source for Genuine GM Parts $27.05 + $10.95 ($38.00 total)

Thanks,
Scott

turbofabricator · 06-15-2008, 09:01 PM

I just had to replace one, too. I broke one (same palce as you did. Let me guess, you forgot to remove the knob, too.) and thought I was gonna have to chew up some plastic and crap one out! Luck was on my side and I just ordered one and it came in about a week. WHEW! I figured it was unique to the TTA. Glad I was wrong.

Scott89TTA · 06-16-2008, 11:01 AM

Quote:

Originally Posted by turbofabricator

I just had to replace one, too. I broke one (same palce as you did. Let me guess, you forgot to remove the knob, too.) and thought I was gonna have to chew up some plastic and crap one out! Luck was on my side and I just ordered one and it came in about a week. WHEW! I figured it was unique to the TTA. Glad I was wrong.

My new one came last Friday...

-Scott

06-01-2008, 09:33 AM	#1 (permalink)
Scott89TTA Registered User Join Date: Jul 2005 Location: Eldersburg, MD Posts: 210	Need to replace gauge lens... Well broke yet another part on my car while installing my new parts...I have lost count of how many bolts I have broke This time I was installing my new ALKY Control kit along with new Autometer boost and electric fuel gauge (pillar pods) so I had removed the pillar and bottom dash panel. I decided to relocate my Scanmaster while I was at it and also fix a missaligned dash gauge frame. So while removing the gauge frame it some how got caught on the bottom of clear lens and snapped the bottom half of the speedo lens...cracked from the bottom left up across the trip reset and across to the right side...I am so frickin' pissed So where can I get a replacement gauge lens ? thanks, Scott __________________ Scott89TTA 1989 TTA #1376 48K...GT6776e, RJC MBC, Alky Control, Scanmaster 2, LT1 MAF w/Translator, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16. P&P heads and cam next Winter if all goes well

06-01-2008, 12:15 PM	#2 (permalink)
Grumpy Registered User Join Date: Sep 2000 Location: Andover, Ma Posts: 11,008	lemme look in my stuff... __________________ Dan dont run your mouth if you cant run your car 86/87 GN and 89 TTA .. tons of parts !! Time to get out! Stuff has to go !!! Otherwise I am cutting it up and throwing it away email ttastage2@yahoo.com

06-02-2008, 11:51 AM	#3 (permalink)
Scott89TTA Registered User Join Date: Jul 2005 Location: Eldersburg, MD Posts: 210	Hey Dan any luck on the gauge lens ? Thanks, Scott Attached Thumbnails __________________ Scott89TTA 1989 TTA #1376 48K...GT6776e, RJC MBC, Alky Control, Scanmaster 2, LT1 MAF w/Translator, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16. P&P heads and cam next Winter if all goes well

06-02-2008, 12:31 PM	#4 (permalink)
Grumpy Registered User Join Date: Sep 2000 Location: Andover, Ma Posts: 11,008	I didn't find anything BUT I may have it in the attic can't get it at the dealer or local junkyard ?? __________________ Dan dont run your mouth if you cant run your car 86/87 GN and 89 TTA .. tons of parts !! Time to get out! Stuff has to go !!! Otherwise I am cutting it up and throwing it away email ttastage2@yahoo.com

06-02-2008, 03:59 PM	#6 (permalink)
turbofish38 Turbocharged BrunoStachel Join Date: Jan 2003 Location: Deltona,FL,USA Posts: 4,732	GM Part Number 25084190. Still available. Same part as on the other Firebird models. __________________ Eric Fisher GM Parts Specialist efisher@billheard.com I brought Top Fuel racing to Isreal. And coined the phrase "Burning Down The Menorah". I invented drifting. So Toyota could conform to the Americans With Disabilties Act. I built this city with Rock and Roll. But I built this car with Dew and PopTarts. 3:10 to Yuma. 11.80 in the quarter mile. I wanted to get pierced. So I bought Prince Albert in a can. Looks like this is going to take some time. 86 GN 11.80@115 TA49,60# Mototrons,TT chip and stock intercooler SCCA Regional Champion. Nebraska Region 1997 1986 Buick Grand National E/StreetPrepared Stay Boosted My Friends

06-15-2008, 09:01 PM	#8 (permalink)
turbofabricator TIG maniac Join Date: Aug 2006 Location: Seattle area Posts: 1,161	I just had to replace one, too. I broke one (same palce as you did. Let me guess, you forgot to remove the knob, too.) and thought I was gonna have to chew up some plastic and crap one out! Luck was on my side and I just ordered one and it came in about a week. WHEW! I figured it was unique to the TTA. Glad I was wrong. __________________ All it takes is time, fabrication, a willingness to live in the garage, have a TIG, chop saw, MIG, angle grinder, mandrel bends, beer, aluminum, hose/fittings, electrical wire/connectors, Vodka, plasma cuttter, complete tool set, tube benders/flaring tools, Rum, tap&die set, gloves,vicodin, Neosporin and an understanding wife.

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Another boost gauge question	gnetic86	Buick V6 Turbo Tech	3	06-06-2005 04:40 PM
Boost Gauge Manufacturers	TTA89	The Waiting Room	6	02-24-2005 03:26 PM
what oil gauge do i buy?	white shadow	Buick V6 Turbo Tech	17	09-09-2003 10:24 PM
do i buy a vacuum/boost gauge or a boost only gauge??	white shadow	Buick V6 Turbo Tech	8	06-26-2003 07:49 PM
Caspers knock gauge. Please help.	Carolinaturbot6	Buick V6 Turbo Tech	7	09-03-2001 06:06 PM