TurboBuicks.com  

Go Back   TurboBuicks.com > Technical Forums > Turbo TransAm Specific
Register FAQ Members List Calendar Garage Store Mark Forums Read

Reply
 
LinkBack Thread Tools Display Modes
Old 05-31-2008, 02:02 PM   #1 (permalink)
Scott89TTA
Registered User
 
Scott89TTA's Avatar
 
Join Date: Jul 2005
Location: Eldersburg, MD
Posts: 213
Racetronix Hotwire kit instructions

So I have had my Racetronix hotwire kit p/n RX-F7-FPWHG-2 w/body ground upgrade system for my TTA for quite a while now and now that I am ready to install it I can't find the darn instructions. Anybody have a copy they could post or e-mail to me would be greatly appreciated.

e-mail to denden6@comcast.net

Thanks,
Scott
__________________
Scott89TTA
1989 TTA #1376

48K...GT6776e, RJC MBC, Alky Control, Scanmaster 2, LT1 MAF w/Translator, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16.

P&P heads and cam next Winter if all goes well
Scott89TTA is offline   Reply With Quote
Old 05-31-2008, 02:59 PM   #2 (permalink)
IL KIM
Registered User
 
Join Date: Dec 2006
Location: Hamburg, Michigan
Posts: 349
Here you go.
Attached Files
File Type: doc Fuel Pump Hot Wire RX-G7-FPWK.doc (57.5 KB, 48 views)
__________________
IL KIM 85 GN w/86 motor, TRW pistons, Weber 206 billet roller cam, EGR welded, o/sized valves, 130psi springs, KB roller rockers, 3400 West Coast conv, adj w/gate, FPR, custom rad, KB ram air, ported, KB headers, G-Body DP, Walbro 340M/hotwire, 60lb Hi Z, CPT66bb, LS1 MAF, TT chip, Hofer Trans, Stevemon TB, RJC powerplate
IL KIM is offline   Reply With Quote
Old 05-31-2008, 06:18 PM   #3 (permalink)
Scott89TTA
Registered User
 
Scott89TTA's Avatar
 
Join Date: Jul 2005
Location: Eldersburg, MD
Posts: 213
Quote:
Originally Posted by IL KIM View Post
Here you go.
Awesome

Thanks,
Scott
__________________
Scott89TTA
1989 TTA #1376

48K...GT6776e, RJC MBC, Alky Control, Scanmaster 2, LT1 MAF w/Translator, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16.

P&P heads and cam next Winter if all goes well
Scott89TTA is offline   Reply With Quote
Old 05-31-2008, 07:34 PM   #4 (permalink)
IL KIM
Registered User
 
Join Date: Dec 2006
Location: Hamburg, Michigan
Posts: 349
OOPs. Just realized you have a TTA. Well, hope it helps anyway,
__________________
IL KIM 85 GN w/86 motor, TRW pistons, Weber 206 billet roller cam, EGR welded, o/sized valves, 130psi springs, KB roller rockers, 3400 West Coast conv, adj w/gate, FPR, custom rad, KB ram air, ported, KB headers, G-Body DP, Walbro 340M/hotwire, 60lb Hi Z, CPT66bb, LS1 MAF, TT chip, Hofer Trans, Stevemon TB, RJC powerplate
IL KIM is offline   Reply With Quote
Old 06-01-2008, 09:32 AM   #5 (permalink)
Scott89TTA
Registered User
 
Scott89TTA's Avatar
 
Join Date: Jul 2005
Location: Eldersburg, MD
Posts: 213
yeah...but it is close enough...I shou8ld be able to figure out any differences.

Thanks again,
Scott
__________________
Scott89TTA
1989 TTA #1376

48K...GT6776e, RJC MBC, Alky Control, Scanmaster 2, LT1 MAF w/Translator, 3" MAF pipe w/K&N X-Steam, 3" Up-Pipe, 3" S/S Action Fab DP, 3" Test Pipe w/QTP electric cutout, 100# valve springs, RJC PP, 60# Motrons, Walbro 340M w/Racetronix hotwire, 160 deg t-stat, TurboTweak 93/Alky chip, Anderson Performance Trans w/StageRite Brake, Billet TCS 9/11 3400-3600 converter, PTS Aluminum Pan, M/T DR's 255/50-16.

P&P heads and cam next Winter if all goes well
Scott89TTA is offline   Reply With Quote
Old 06-02-2008, 07:32 AM   #6 (permalink)
Racetronix
Registered User
 
Racetronix's Avatar
 
Join Date: Feb 2002
Posts: 171
Quote:
Originally Posted by Scott89TTA View Post
So I have had my Racetronix hotwire kit p/n RX-F7-FPWHG-2 w/body ground upgrade system for my TTA for quite a while now and now that I am ready to install it I can't find the darn instructions. Anybody have a copy they could post or e-mail to me would be greatly appreciated.

e-mail to denden6@comcast.net

Thanks,
Scott
E-mail support@racetronix.com for instructions. Thanks.
Racetronix is offline   Reply With Quote
Reply


Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

vB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Racetronix Hotwire kit More_Boost!! Buick Racers in Toronto and Surrounding Areas 1 03-14-2008 03:54 PM
Is my hotwire kit working? V8Kilr Buick V6 Turbo Tech 7 09-22-2006 11:08 PM
Racetronix Hotwire Observation cashbrook27 Buick V6 Turbo Tech 4 06-10-2005 08:27 PM
Racetronix Hotwire kit NEW Aaron B Parts For Sale 0 05-24-2004 05:57 AM
Racetronix Fuel Pump Wiring Upgrade Kit Spoolin Around Buick Enthusiasts of Eastern Ontario and Quebec Region 0 11-17-2003 01:56 PM


All times are GMT -5. The time now is 01:19 AM.


Powered by vBulletin® Version 3.6.7
Copyright ©2000 - 2008, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.0.0