Parting out 89 GTA

87GTA-turbo · 04-28-2004, 05:03 PM

Just seeing if anyone is interested in whatever is left.
89 GTA
Engine trans DS sold.
Marginal spoiler, 3.27 9 bolt. whold body still intact.
15 in Weld Pro-stars

fly89gta · 04-28-2004, 11:55 PM

How come you're parting it?

janlarsson · 04-29-2004, 09:12 AM

What color interior?

87GTA-turbo · 05-01-2004, 07:52 PM

I got it for a $1000. because my trans went (bellhousing cracked) and it was cheaper to get it out of there than to go to the junk yard and pay $500 for a trans that might or might not work.
I did good so far I got took the stock GTA rims w/tires, trans, aluminum driveshaft, and rear glass and switched them with mine, sold the engine, seats, console.
Its too bad I am out in Hawaii because if I was on the mainland the sheetmetal would go too because its all straight and not rusted.

BoostedThrills · 05-04-2004, 07:52 PM

I need a VSS

how much ?

thanks

87GTA-turbo · 05-07-2004, 03:22 PM

I will post a picture of it tell me if its the one you need.

87GTA-turbo · 05-08-2004, 10:18 PM

Sorry, I cannot find the VSS now, my life has been hectic the last few weeks and moving out of my apartment and getting ready for deployment and all, sorry i could be of better assistance.

Sinister87 · 05-28-2004, 10:30 PM

Do you still have the 9 bolt?

fla89tta · 08-24-2004, 08:38 PM

I'm in need of a driver side a pillar piece, Thanks

87GTA-turbo · 09-02-2004, 10:55 AM

The car is a hard top.
I am going to begin dismantling it fully in mid Sept

87GTA-turbo · 09-26-2004, 11:30 PM

last week my current car got damaged in the rear quarter panel....
and that was the last straw, almost every panel had bondo and the hood had a slight bend so I'm going to prep and paint this one and move it all over.....the 89 is in so much better shape.
talk about ambitious projects.....so i guess I will hav a 87 shell to part out.....

CombatComProg · 09-27-2004, 05:56 PM

Looking for the TTA interior colored trim or black or grey interior trim since I may be doing a Grand National paint scheme on the TTA in the near future. I'm specifically looking for door panels and the plastic trim on the floor underneath the door for both driver and passenger sides. Thanks!

fasTTA707 · 11-02-2004, 07:46 PM

does the GTA have the same seats as the TTA? if so are yours in good shape and are they they same tan color? i might be interested if they are, please let me know. thanks.

04-28-2004, 05:03 PM	#1 (permalink)
87GTA-turbo Stupidest man alive. Join Date: Dec 2003 Location: Beaufort, SC Posts: 2,391	Parting out 89 GTA Just seeing if anyone is interested in whatever is left. 89 GTA Engine trans DS sold. Marginal spoiler, 3.27 9 bolt. whold body still intact. 15 in Weld Pro-stars __________________ Steve- “It only gets worse...." 1987 GN, Moonroof, GNX dash, 109 .030 TRW Forged TE-62, G Body DP, 204/214cam, 60-65 Siemens inj, Extender chip, LS1 MAF, port matched intake and heads, Razor's meth. inj. CK Trans, Pats 2800 conv, Metco LCA's Monitored by:PLX WB, EGT, SM & DS 11.8 @ 117 w/ the 4.1 (RIP) 7/08 1987 Gray Regal T LS1 MAF, 32lb inj, Chip, mostly stock 2001 Jeep Cherokee 4.0 I6 4x4

04-28-2004, 11:55 PM	#2 (permalink)
fly89gta MMM MMMM *****! Join Date: Oct 2002 Location: Feasterville,PA Posts: 392	How come you're parting it? __________________ -98 Corvette-Magnaflow exhaust, Vararam intake, cross-drilled rotors. -2000 Z28-Monterey Maple Metallic-Gone -89 GTA- Turbo Buick powered-Gone Tony

04-29-2004, 09:12 AM	#3 (permalink)
janlarsson TTA1078 Join Date: Mar 2004 Location: United Kingdom Posts: 121	What color interior? __________________ Jan 1989 TTA #1078 1 of 5 known in the UK 1989 TTA #1078 Project and Restoration Pictures TTA Stuff 4 SALE (Updated May 13th 2007)

05-01-2004, 07:52 PM	#4 (permalink)
87GTA-turbo Stupidest man alive. Join Date: Dec 2003 Location: Beaufort, SC Posts: 2,391	I got it for a $1000. because my trans went (bellhousing cracked) and it was cheaper to get it out of there than to go to the junk yard and pay $500 for a trans that might or might not work. I did good so far I got took the stock GTA rims w/tires, trans, aluminum driveshaft, and rear glass and switched them with mine, sold the engine, seats, console. Its too bad I am out in Hawaii because if I was on the mainland the sheetmetal would go too because its all straight and not rusted. __________________ Steve- “It only gets worse...." 1987 GN, Moonroof, GNX dash, 109 .030 TRW Forged TE-62, G Body DP, 204/214cam, 60-65 Siemens inj, Extender chip, LS1 MAF, port matched intake and heads, Razor's meth. inj. CK Trans, Pats 2800 conv, Metco LCA's Monitored by:PLX WB, EGT, SM & DS 11.8 @ 117 w/ the 4.1 (RIP) 7/08 1987 Gray Regal T LS1 MAF, 32lb inj, Chip, mostly stock 2001 Jeep Cherokee 4.0 I6 4x4

05-04-2004, 07:52 PM	#5 (permalink)
BoostedThrills Registered User Join Date: Sep 2000 Location: PA Posts: 375	I need a VSS how much ? thanks __________________ 89 TTA #1,104.020J&E pistons,steel main caps,ported heads,214/210 billet roller cam,ARP, PT54,THDP,MAF-T & LT1 maf,ported intake and 70mm TB,CK stage 2 trans with 3,600 9/11 converter 2002 Chevy Avalanche,4X4 5.3 ,StealthOffRoad winch bumper,RamAir Hood 2001 Chevy Silverado 4X4 Quad cab(the wife's ride)

05-07-2004, 03:22 PM	#6 (permalink)
87GTA-turbo Stupidest man alive. Join Date: Dec 2003 Location: Beaufort, SC Posts: 2,391	I will post a picture of it tell me if its the one you need. __________________ Steve- “It only gets worse...." 1987 GN, Moonroof, GNX dash, 109 .030 TRW Forged TE-62, G Body DP, 204/214cam, 60-65 Siemens inj, Extender chip, LS1 MAF, port matched intake and heads, Razor's meth. inj. CK Trans, Pats 2800 conv, Metco LCA's Monitored by:PLX WB, EGT, SM & DS 11.8 @ 117 w/ the 4.1 (RIP) 7/08 1987 Gray Regal T LS1 MAF, 32lb inj, Chip, mostly stock 2001 Jeep Cherokee 4.0 I6 4x4

05-08-2004, 10:18 PM	#7 (permalink)
87GTA-turbo Stupidest man alive. Join Date: Dec 2003 Location: Beaufort, SC Posts: 2,391	Sorry, I cannot find the VSS now, my life has been hectic the last few weeks and moving out of my apartment and getting ready for deployment and all, sorry i could be of better assistance. __________________ Steve- “It only gets worse...." 1987 GN, Moonroof, GNX dash, 109 .030 TRW Forged TE-62, G Body DP, 204/214cam, 60-65 Siemens inj, Extender chip, LS1 MAF, port matched intake and heads, Razor's meth. inj. CK Trans, Pats 2800 conv, Metco LCA's Monitored by:PLX WB, EGT, SM & DS 11.8 @ 117 w/ the 4.1 (RIP) 7/08 1987 Gray Regal T LS1 MAF, 32lb inj, Chip, mostly stock 2001 Jeep Cherokee 4.0 I6 4x4

05-28-2004, 10:30 PM	#8 (permalink)
Sinister87 Lurker Join Date: May 2004 Location: VA Posts: 21	Do you still have the 9 bolt? __________________ PEOPLE WHO KNOW THE LEAST, ARGUE THE MOST

08-24-2004, 08:38 PM	#9 (permalink)
fla89tta Lurker Join Date: Aug 2004 Location: Port Richey, Fl Posts: 12	Is it t-top? I'm in need of a driver side a pillar piece, Thanks

09-02-2004, 10:55 AM	#10 (permalink)
87GTA-turbo Stupidest man alive. Join Date: Dec 2003 Location: Beaufort, SC Posts: 2,391	The car is a hard top. I am going to begin dismantling it fully in mid Sept __________________ Steve- “It only gets worse...." 1987 GN, Moonroof, GNX dash, 109 .030 TRW Forged TE-62, G Body DP, 204/214cam, 60-65 Siemens inj, Extender chip, LS1 MAF, port matched intake and heads, Razor's meth. inj. CK Trans, Pats 2800 conv, Metco LCA's Monitored by:PLX WB, EGT, SM & DS 11.8 @ 117 w/ the 4.1 (RIP) 7/08 1987 Gray Regal T LS1 MAF, 32lb inj, Chip, mostly stock 2001 Jeep Cherokee 4.0 I6 4x4

09-26-2004, 11:30 PM	#11 (permalink)
87GTA-turbo Stupidest man alive. Join Date: Dec 2003 Location: Beaufort, SC Posts: 2,391	NOT parting out last week my current car got damaged in the rear quarter panel.... and that was the last straw, almost every panel had bondo and the hood had a slight bend so I'm going to prep and paint this one and move it all over.....the 89 is in so much better shape. talk about ambitious projects.....so i guess I will hav a 87 shell to part out..... __________________ Steve- “It only gets worse...." 1987 GN, Moonroof, GNX dash, 109 .030 TRW Forged TE-62, G Body DP, 204/214cam, 60-65 Siemens inj, Extender chip, LS1 MAF, port matched intake and heads, Razor's meth. inj. CK Trans, Pats 2800 conv, Metco LCA's Monitored by:PLX WB, EGT, SM & DS 11.8 @ 117 w/ the 4.1 (RIP) 7/08 1987 Gray Regal T LS1 MAF, 32lb inj, Chip, mostly stock 2001 Jeep Cherokee 4.0 I6 4x4

09-27-2004, 05:56 PM	#12 (permalink)
CombatComProg Registered User Join Date: Aug 2004 Location: Scott Air Force Base, Illinois (near St. Louis) Posts: 199	Looking for the TTA interior colored trim or black or grey interior trim since I may be doing a Grand National paint scheme on the TTA in the near future. I'm specifically looking for door panels and the plastic trim on the floor underneath the door for both driver and passenger sides. Thanks!

11-02-2004, 07:46 PM	#13 (permalink)
fasTTA707 Registered User Join Date: May 2004 Location: 707 ca Posts: 20	does the GTA have the same seats as the TTA? if so are yours in good shape and are they they same tan color? i might be interested if they are, please let me know. thanks. __________________ Bryan -Fairfield, CA TTA #345

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode