FAST start-up config file

turborambler · 08-13-2008, 06:23 PM

I just installed a FAST system - not the XFI model - the one before that. I need to get a base tune to start it. If anybody has anything that is close that would be great! I am rookie to this stuff and have only messed with stock ECM setups.

Car Info:

Buick 3.8 V6
55 lbs Siemens Injectors
PT-51 Precision Turbo
wide band O2
Stock heads
5” single exhaust
3200 stall – turbo 400 tranny with manual valve body
3:73 gear with 28” tall tires
No a/c
No power steering
No power brakes
Running pump gas for now – sometimes use unleaded race fuel
Car weighs 3200 lbs with me in it
No VSS hooked up for now

The software is version 1.02 windows version of the software.

Jmccustoms · 08-14-2008, 10:27 PM

Sent you a PM

08-13-2008, 06:23 PM	#1 (permalink)
turborambler Registered User Join Date: Mar 2005 Posts: 1	FAST start-up config file I just installed a FAST system - not the XFI model - the one before that. I need to get a base tune to start it. If anybody has anything that is close that would be great! I am rookie to this stuff and have only messed with stock ECM setups. Car Info: Buick 3.8 V6 55 lbs Siemens Injectors PT-51 Precision Turbo wide band O2 Stock heads 5” single exhaust 3200 stall – turbo 400 tranny with manual valve body 3:73 gear with 28” tall tires No a/c No power steering No power brakes Running pump gas for now – sometimes use unleaded race fuel Car weighs 3200 lbs with me in it No VSS hooked up for now The software is version 1.02 windows version of the software.

08-14-2008, 10:27 PM	#2 (permalink)
Jmccustoms Registered User Join Date: Jun 2002 Location: Nesbit Ms USA Posts: 174	Sent you a PM __________________ Jeff 87 WE4,3" exhaust,3" downpipe w/ test pipe,3"flowmaster,TE-61,009's,custom cold air kit,rear seat braces,RJC power plate, scanmaster, autometer water, oil, vac/boost,triple gauge pillar pod, Poly suspension bushings,boxed upper and lower rear arms,moser 30 spline,auburn rock w/richmond gears,front mount IC,dual intrepid fans,custom oil cooler w/ fan,210-210 comp roller with roller lifters, manley stainless valves,diamond pistons,T&D roller rockers, translator plus with mass air,62 mm throttle body(gbody)ported and polished heads and intake,times coming soon. Bugs dont stand a chance at 100 plus and hell to dig out of the paint.....but so fun killin em!!!! Need parts........Brian's your man, www.gbodyparts.com or bweavy@aol.com. Thanks again Brian!!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
fast idle at start up then small miss	amfam	Buick V6 Turbo Tech	3	05-02-2008 07:05 PM
Need a start up file	FastRegalWE2	Stage II, DFI & SpeedPro	0	01-27-2007 12:34 PM
Fiero No Start, Please Lend a Hand	Shane	The Waiting Room	6	12-11-2005 11:36 PM
Crank No Start, Need some Input :>)	darkfa8	Buick V6 Turbo Tech	9	10-29-2002 09:20 PM
cold start idle problem	badbuick87gn	Buick V6 Turbo Tech	11	05-07-2001 06:39 AM