ALL GM - BRAND NEW - ported blueprinted timing cover

earlbrown · 06-03-2009, 01:36 PM

One ready to go ported, modified, blueprinted GM cover with all GM parts and a gasket matched Fel-Pro gasket set with neoprene front seal. Fully assembled and ready to install. $400

Shipping in the lower 48 is $20 and my paypal address is earlbrown@mindspring.com

Any questions feel free to PM or ask via that email address.

ronbuick · 06-15-2009, 02:56 PM

Earl, what would a person pick-up in volume and or pressure over another good stock
one, cause that is alot of dinero, so I guess what I'm asking is for me to be convinced by you to spend that kind of in my case hard earned money, thanks for your input
Earl.

Ron

Just a Six?? · 06-15-2009, 04:03 PM

Quote:

Originally Posted by ronbuick

Earl, what would a person pick-up in volume and or pressure over another good stock
one, cause that is alot of dinero, so I guess what I'm asking is for me to be convinced by you to spend that kind of in my case hard earned money, thanks for your input
Earl.

Ron

22-25 lbs at idle & an Instant 60 psi with some RPM. At least thats what I get. Altho, Earl's cover may even do better but I follow his mods pretty close & they flat out work! Done 5 covers now & they are great & all thanks to Earl & his writeup!!

earlbrown · 06-15-2009, 06:40 PM

Just a Six, that's a pretty general assumption. Everybody that I've modified a cover reports close to the same thing. If you have a VERY worn out engine I can't say how fast the pressure will come up. That's the key and the max PSI is controlled by the relief spring (and where you gauge is tapped).
I've done quite a few of these over the years and everybody that I've heard back from has reported results better than they expected.

I actually do about 3 times the work to my covers than I listed in my article. The main thing I concentrate on isn't stupid high PSI numbers or anything that would win a bench race.
What I work on is making sure that everything is the way it should be. Then make it easier to do it's job. Freeing up HP, taking the load off the timing set and unloading the front cam bearing is my main objective. It also helps against excessively beating up the oil and shearing it.

I'm probably going to stop selling these covers and just packrat my inventory soon. I've been considering contacting some vendors and seeing if they want to buy me out. For some reason when any other part gets discontinued they price increases a million percent (take hood pads and headlight bezels, and the pull strap covers for instance).
When these covers were available the discount stores sold them for $279 plus tax. The filter adapter is around $70 and I'm not sure what the GM oil pump, pump gasket, bolts, and the timing gasket set cost.

Granted you can get a bare aftermarket cover for around $120 I believe. I can't compete with that. TA performance sells some sort of modified aftermarket unit for $450 and I think SE turbo sells a unit for $500. (TA probably charged $80 for shipping too)

On the other hand I know for a fact that my cover aren't full of trash, flashing, the cam sensor will fit, the crank sensor will be spaced right, no allen screw will fall onto the timing set, and porosity won't hemorrhage oil from the high pressure side.

Steve Wood · 06-15-2009, 07:21 PM

given that one gets a blueprinted cover/pump that is done by someone that actually understands what he is doing instead of a bs big gear pump that puts unneeded wear and tear on the front of the engine, this is a very competitive price when compared to what is available out there. Takes a lot of hours of work to to offer a product made like this.

earlbrown · 07-03-2009, 07:51 PM

Now available in 14 bolt as well as 20

Hissin' Buford · 07-06-2009, 09:02 PM

If I ever need one or do another engine your's will be my choice.

bautowreckers · 07-07-2009, 06:36 AM

a stock engine and see a diffrence or does there need to be mods to the engine to see a diffrence?

earlbrown · 07-07-2009, 10:22 AM

This unit will work from absolutely factory stock all the way up to the most mods you can imagine.

earlbrown · 08-12-2009, 10:54 PM

It turns out I think I'd like to eat next week so I need to move some aluminum.

The first person that wants to get one of my oil systems will get a FREE, that's right FREE, adjustable oil pressure regulator upgrade and a copy of "Camp Cuddly Pines Powertool Massacre" staring future senator Stormy Daniels (and my girl Keri Sable

)!

It'll get ALL the fluids flowing and you'll be saying "ShamWOW" everytime!

Just a Six?? · 08-17-2009, 11:18 AM

TTT for Earl!

gnsandman · 08-18-2009, 10:06 PM

sold. payment sent thru paypal. please let me know when shipped.

boostya · 08-18-2009, 10:38 PM

Thumbs up the earl's timing cover. My car runs with one and I will never go back. Bump for earl.

gnsandman · 08-19-2009, 10:00 PM

is the copy of "Camp Cuddly" new or used,lol!

earlbrown · 08-20-2009, 11:08 PM

Quote:

Originally Posted by gnsandman

is the copy of "Camp Cuddly" new or used,lol!

It's tested and working! and on the way to you...

I also threw a timing cover assembly in the box since I was heading to he post office anyway. It got shipped out Priority so I'm guessing you'll see it Monday or Tuesday.

If you need any help with the adjustable pressure regulator. Right now it's set at "stock" spring pressure. Running it in with raise pressure and adding the extra gasket will lower it below the stock setting if you want to.

06-03-2009, 01:36 PM	#1 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 4,476	ALL GM - BRAND NEW - ported blueprinted timing cover One ready to go ported, modified, blueprinted GM cover with all GM parts and a gasket matched Fel-Pro gasket set with neoprene front seal. Fully assembled and ready to install. $400 Shipping in the lower 48 is $20 and my paypal address is earlbrown@mindspring.com Any questions feel free to PM or ask via that email address. __________________ PORN: It's not just for breakfast, lunch, and dinner anymore

06-15-2009, 02:56 PM	#2 (permalink)
ronbuick Registered User Join Date: Feb 2002 Location: emmett, Id. Posts: 88	Earl, what would a person pick-up in volume and or pressure over another good stock one, cause that is alot of dinero, so I guess what I'm asking is for me to be convinced by you to spend that kind of in my case hard earned money, thanks for your input Earl. Ron __________________ Ron Neisler, Emmett,Id. 1987 T/R 11.69@117, 2009 G8 GT, 13.61@104, 2.18 60'

06-15-2009, 06:40 PM	#4 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 4,476	Just a Six, that's a pretty general assumption. Everybody that I've modified a cover reports close to the same thing. If you have a VERY worn out engine I can't say how fast the pressure will come up. That's the key and the max PSI is controlled by the relief spring (and where you gauge is tapped). I've done quite a few of these over the years and everybody that I've heard back from has reported results better than they expected. I actually do about 3 times the work to my covers than I listed in my article. The main thing I concentrate on isn't stupid high PSI numbers or anything that would win a bench race. What I work on is making sure that everything is the way it should be. Then make it easier to do it's job. Freeing up HP, taking the load off the timing set and unloading the front cam bearing is my main objective. It also helps against excessively beating up the oil and shearing it. I'm probably going to stop selling these covers and just packrat my inventory soon. I've been considering contacting some vendors and seeing if they want to buy me out. For some reason when any other part gets discontinued they price increases a million percent (take hood pads and headlight bezels, and the pull strap covers for instance). When these covers were available the discount stores sold them for $279 plus tax. The filter adapter is around $70 and I'm not sure what the GM oil pump, pump gasket, bolts, and the timing gasket set cost. Granted you can get a bare aftermarket cover for around $120 I believe. I can't compete with that. TA performance sells some sort of modified aftermarket unit for $450 and I think SE turbo sells a unit for $500. (TA probably charged $80 for shipping too) On the other hand I know for a fact that my cover aren't full of trash, flashing, the cam sensor will fit, the crank sensor will be spaced right, no allen screw will fall onto the timing set, and porosity won't hemorrhage oil from the high pressure side. __________________ PORN: It's not just for breakfast, lunch, and dinner anymore Last edited by earlbrown; 06-15-2009 at 06:51 PM.

06-15-2009, 07:21 PM	#5 (permalink)
Steve Wood Scam Detector Enabled Join Date: Sep 2000 Location: East of Eden, Texas Posts: 41,388	given that one gets a blueprinted cover/pump that is done by someone that actually understands what he is doing instead of a bs big gear pump that puts unneeded wear and tear on the front of the engine, this is a very competitive price when compared to what is available out there. Takes a lot of hours of work to to offer a product made like this. __________________ ------------------ A proud member of Stonewallers Against Bogus Technology Fix reason firmly in her seat, and call to her tribunal every fact, every opinion. Question with boldness even the existence of a God; because, if there be one, he must more approve of the homage of reason, than that of blindfolded fear. Thomas Jefferson . www.vortexbuicks-etc.com

07-03-2009, 07:51 PM	#6 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 4,476	Now available in 14 bolt as well as 20 __________________ PORN: It's not just for breakfast, lunch, and dinner anymore

07-06-2009, 09:02 PM	#7 (permalink)
Hissin' Buford Boost Addict? Join Date: Oct 2004 Location: NC Foothills Posts: 2,078	If I ever need one or do another engine your's will be my choice. __________________ 86 T-Type - Sold

07-07-2009, 06:36 AM	#8 (permalink)
bautowreckers Registered User Join Date: Jun 2009 Location: New Jersey Posts: 62	can this cover be put on a stock engine and see a diffrence or does there need to be mods to the engine to see a diffrence?

07-07-2009, 10:22 AM	#9 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 4,476	This unit will work from absolutely factory stock all the way up to the most mods you can imagine. __________________ PORN: It's not just for breakfast, lunch, and dinner anymore

08-12-2009, 10:54 PM	#10 (permalink)
earlbrown Iheartporn Join Date: Jul 2001 Location: lagrange ga Posts: 4,476	It turns out I think I'd like to eat next week so I need to move some aluminum. The first person that wants to get one of my oil systems will get a FREE, that's right FREE, adjustable oil pressure regulator upgrade and a copy of "Camp Cuddly Pines Powertool Massacre" staring future senator Stormy Daniels (and my girl Keri Sable )! It'll get ALL the fluids flowing and you'll be saying "ShamWOW" everytime! __________________ PORN: It's not just for breakfast, lunch, and dinner anymore Last edited by earlbrown; 08-12-2009 at 10:57 PM.

08-17-2009, 11:18 AM	#11 (permalink)
Just a Six?? OK! Who Farted Again?? Join Date: May 2003 Location: Toronto Posts: 13,486	TTT for Earl! __________________ 87 LTD. Purchased May 88 Doeskin leather, coach lites, moonroof & carpeted trunk. No Factory Hood Ornament! Special order by the VP of GM Canada! Not another like it! Lots of Go Fast goodies! 11.5 is as Fast as I go! Thats what the track told me! It's a Small World, but I wouldn't want to Paint It!! BPG Member #2040

08-18-2009, 10:06 PM	#12 (permalink)
gnsandman Registered User Join Date: Apr 2009 Posts: 23	sold. payment sent thru paypal. please let me know when shipped.

08-18-2009, 10:38 PM	#13 (permalink)
boostya Boostya Join Date: Feb 2009 Location: Calif Posts: 21	Timing cover Thumbs up the earl's timing cover. My car runs with one and I will never go back. Bump for earl.

08-19-2009, 10:00 PM	#14 (permalink)
gnsandman Registered User Join Date: Apr 2009 Posts: 23	is the copy of "Camp Cuddly" new or used,lol!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
gnttype.org???	BCP Rob	Mid Atlantic Grand National Association (MAGNA)	18	04-09-2006 07:29 PM
Timing cover wear need advice	cgayer455	Buick V6 Turbo Tech	2	07-19-2002 12:00 PM
Warning: Timing chain, timing chain tensioner, timing cover, cam button	JOKER	Buick V6 Turbo Tech	14	04-18-2002 10:54 PM
front timing cover with seal on the outside?	Nasty Wendy	Buick V6 Turbo Tech	2	03-14-2002 07:22 PM
Front Timing Cover Help !!!!	KWIKR 1	Buick V6 Turbo Tech	5	12-21-2001 07:34 PM