4.1 rotating assembly

ttypewhite · 02-21-2009, 12:51 PM

I have a complete rotating assembly here for anybody that's building a 4.1that wants a 274 cubic inch motor. This is for a stock block or StageI 4.1 with 8 or 14 bolt head. I bought this crank from Lance Ward 4 years ago and its in the same specs since I bought it off of him. Crank was also checked out by Mike Morran and given the thumbs up before I bought it. Drove this all last year with no issues. This is for off center motors. Check the kill section;)
- 3.625 stroke Buick Motorsports Steel Forged crank (wide journal) that is 2.4785 on the mains and 2.2185 journal size (20 under on the mains and 30 under on the rods)
- Carrillo 6.350 rods
- Forged Ross Pistons 4" dia with rings. Speed Pro file fit plasma rings. Compression height on piston is 1.225" Both used for just the summertime last year. No track duty on this set up, just street driving.

$1700 shipped for the entire setup. Will part out if all parts are spoken for.

As you can see the pistons were bought brand new and used for just last summer, rings are in mint condition as well.

ttypewhite · 03-08-2009, 12:40 AM

ttt

michaelshobby · 04-09-2009, 05:07 PM

your 4.1 is it still available...1-813-817-5571

ttypewhite · 04-21-2009, 02:36 PM

Quote:

Originally Posted by michaelshobby

your 4.1 is it still available...1-813-817-5571

Thanks for coming out

Still for sale gents.

02-21-2009, 12:51 PM	#1 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 1,070	4.1 rotating assembly I have a complete rotating assembly here for anybody that's building a 4.1that wants a 274 cubic inch motor. This is for a stock block or StageI 4.1 with 8 or 14 bolt head. I bought this crank from Lance Ward 4 years ago and its in the same specs since I bought it off of him. Crank was also checked out by Mike Morran and given the thumbs up before I bought it. Drove this all last year with no issues. This is for off center motors. Check the kill section;) - 3.625 stroke Buick Motorsports Steel Forged crank (wide journal) that is 2.4785 on the mains and 2.2185 journal size (20 under on the mains and 30 under on the rods) - Carrillo 6.350 rods - Forged Ross Pistons 4" dia with rings. Speed Pro file fit plasma rings. Compression height on piston is 1.225" Both used for just the summertime last year. No track duty on this set up, just street driving. $1700 shipped for the entire setup. Will part out if all parts are spoken for. As you can see the pistons were bought brand new and used for just last summer, rings are in mint condition as well. __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653

03-08-2009, 12:40 AM	#2 (permalink)
ttypewhite Registered User Join Date: Feb 2004 Location: T-Dot Posts: 1,070	ttt __________________ **NOVELLUS GRAPHICS RESOURCES FOR YOUR PRINT, PREPRESS AND CREATIVE NEEDS** www.novellusgraphics.com 9.94@ 135mph with a 1.37 sixty foot http://videos.streetfire.net/video/e...56017164c6.htm www.anderson-performance.com 410-282-9335 DLS Engine Development 886 E 900 N Wheatfield IN 46392 219-956-3653

04-09-2009, 05:07 PM	#3 (permalink)
michaelshobby Registered User Join Date: Apr 2009 Posts: 2	rotating assembly your 4.1 is it still available...1-813-817-5571

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stroked Forged rotating Assembly for 4.1(Stock block or Stage I)	ttypewhite	Parts For Sale	7	02-09-2009 11:29 AM
Stroked Forged rotating Assembly for 4.1 w/RJC girdle	ttypewhite	Parts For Sale	0	01-23-2009 01:03 PM
GM GNX part number bullentin	pacos87gn	Buick V6 Turbo Tech	1	08-27-2008 11:42 AM
stock rotating assembly, 8445 heads	1985GN	Parts For Sale	5	01-27-2007 04:23 PM